Saber HSS-Co5 TiN Coated Cross Hole Countersink Set - 8032-S1

Saber HSS-Co5 TiN Coated Cross Hole Countersink Set

• Saber HSS-Co5 (Cobalt) TiN Coated Cross Hole Round Shank 90 Degree Countersink Set

About Cross Hole Countersinks

• For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
• The intersection of the hole and cone form the cutting edge of the tool.
• The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
• If this does not occur the cutting edge will lack clearance and rub rather than bite into the material. This clearance is referred to as cutting relief.
• The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
• These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation, needs to be removed for cosmetic and safety reasons.
• They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.

Contents

Title
Qty
Saber 15mm 90 Degree TiN Coated HSS-Co5 (Cobalt) Cross Hole Countersink
1
Saber 21mm 90 Degree TiN Coated HSS-Co5 (Cobalt) Cross Hole Countersink
1
Saber 28mm 90 Degree TiN Coated HSS-Co5 (Cobalt) Cross Hole Countersink