Star-M Auger Drill Bit - 6 Series

• The bit is equipped with an axis usable both with electric drill and hand brace. Useful when boring many holes at a time.

About No.6 Series Softwood Drill Auger

• These ranges are often referred to as Clean Cutting Auger, due to the clean cutting wing, or spur on the front.
• The spur pre-cuts the material before the cutting edge & provides a clean entry & exit to the timber.
• The screw point pulls the bit through. The single twist or flute clears the chips & leaves a cylindrical drilling body to aid straight drilling.
• These bits drill a tidy hole without surface breakage & are best suited to Soft Woods such as those found in house frames.
• Common users of these auger bits are carpenters, electricians & plumbers.