Mushroom Head Nail In Anchor Zinc Alloy Body Steel Pin

• Hobson Nail Anchors are light-duty two-piece assembled anchors that are used in pre-drilled holes.
• The Nylon anchor comprises an expandable nylon sleeve and a high-strength metal tapered pin.
• The metal anchor comprises a flanged longitudinal slotted zinc alloy body and a high strength metal tapered pin.
• Fixing is achieved by inserting the anchor into the hole and hitting with a hammer until the underside of the anchor head is flush with the fixture.
• Additionally, the nylon anchor is then set by tapping or screwing the metal pin into the nylon sleeve.
• This allows for the sleeve to be fully expanded and compressed against the sidewall of the hole.

• Rapid simple low-cost installation.
• Through fastening.
• Immediate loading of the fixture.
• Can be removed using a screwdriver.

• Ideally used in an application that requires a light-duty anchor for fixing into concrete, brick, block, or wallboard.
• Typically used by contractors in the building, electrical, carpentry, and interior finishing trades.
• Commonly used for securing lightweight fixtures such as signs, brackets, clips, electrical fixings, timber, and plastic fixings, etc.