AAP Dr Brass Gate Valve

• The wedge gate valve provides an uninterrupted passage for the flow of fluid. Body ends are inline and the gate is moved between body seats by a spindle, whose axis is at right angles to that of the body ends.
• It may be either inside screw, in which the actuating thread of the spindle is contained inside the valve and thus in contact with the line fluid, or outside screw, in which the actuating thread of the spindle is exterior to the bonnet.
• The valve is used extensively where a straight flow is required with minimum pressure drop.
• It is not recommended for flow regulation and should only be used fully opened or closed.

DR Brass Approved Gate Valve - A59M

Applications - Potable Water, flow-Pressure Heating, Waterworks, Irrigation, Air Systems and flow-Pressure Steam