Description

Carbide PVD (E06) Turbo 12 Square Shoulder Milling Insert

F15M grade, carbide PVD.
PVD (Physical Vapour Deposition).
PVD coated grades are recommended for applications with low feed rates where high edge toughness is required.
PVD-coated grades are suitable for applications with low to intermediate cutting speed.

F15M Grade

The hard and wear-resistant grade for milling in aluminium and non-ferrous alloys.
Excellent grade, in combination with protected cutting edges, for high-speed machining in hardened steel.
(Ti, Al) N – TiN\

About Turbo Square Shoulder Milling

Aggressively optimize your cutting properties with Seco’s Turbo family of cutters that reduce heat generation and cutting forces.
These cutters are available in a variety of configurations, all with copy milled pockets for insert stability and two pitch configurations to tackle almost every material.
Maximize output in a wide range of applications including; roughing, semi-finishing, finishing.
Methods include all facing, slotting, profiling contouring, helical interpolation, ramping, and plunging applications.