***This pump is NOT currently stocked in our warehouse but can usually be sourced within 24 hours. Contact us if you need this pump urgently.***

ClayTech Aquatron2P Controller - Pump Controller

• Simple to use electronic pump controller. It enables the pump to turn on when the household tap is opened and turns off when the tap is closed.
• Also provides dry-run protection when the rainwater tank is empty.
• If the rainwater tank is empty it re-starts the pump every 24 hours to see if it has rained.

Electronic Pump Controller

• It allows automatic pump operation: It starts the pump when the tap is turned on and stops it about 10 seconds after the tap is turned off.
• It protects the pump from dry operation: It stops the pump when there is no flow of water, thus preventing possible damage to the pump.
• This alarm is indi­cated by the LED called Failure on the front of the device.
• It ensures constant flow and pressure.
• 24-hour automatic restart to test for rainwater.
• Easy plug and play installation.
• The controller has a 3-pin socket for the pump to be plugged into and a 3 pin plug to connect to the electrical supply power-point.

AquaTron Technical Data