CRC ETCH-10 Red Oxide Vinyl Etch Primer

• CRC ETCH-10 is a high-performance Red Oxide Vinyl Etch Primer designed for superior adhesion & corrosion resistance on various metal surfaces. (Ferrous & Non-Ferrous). 
• CRC ETCH-10 is ideal for key-coating metals, bare aluminium, stainless steel, brass, copper & galvanised metal surfaces.
• CRC ETCH-10 can be overcoated with most standard decorative paint systems for metals.

Applications:

• Industrial manufacturing, fabricating. Boat or Vehicle building. Suitable for use on Ferrous & Non-Ferrous metals.

Features/Benefits:

• Excellent Adhesion: Formulated to bond effectively with bare metal surfaces, including steel, aluminum, and galvanized metals, ensuring the topcoat adheres securely
• Corrosion Resistance: Provides a durable barrier that helps prevent rust and corrosion, even in harsh environments, offering long-term protection
• Durable Coating: Incorporates vinyl resin components for enhanced flexibility and durability, helping create an impermeable layer, important for when in harsh environments where water may be present
• Versatile Application: Suitable for use in automotive, marine, and industrial settings, making it an ideal choice for a wide range of projects. – exposed metal that may need storing outside

Surface Preparation:

1. Remove signs of corrosion with a wire brush or emery paper or similar
2. Clean surface with CRC Brakleen or similar degreaser if required
3. Where possible, abrade surface with disc grinding, wire brush or sandpaper

Application & Directions:

1. Shake can until the agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed
2. Apply with smooth even strokes to a clean dry surface holding can approximately 25cm from surface until desired coverage is achieved
3. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes