CRC Power Lube with PTFE Lubricant 300g Aerosol

CRC Power Lube with PTFE is a multi-purpose lubricant with PTFE and extreme pressure additives. It has a Falex load test result of 3,750 lbs (ASTM D-3233).

Its low viscosity film penetrates cracks, crevices and joints, spreads a thin even film and displaces moisture and surface contaminants. It carries several health and environmental hazard statements, so read the hazard section before use.

Where this product is used

• Bearings, gears, linkages, motors, chains, cables and rollers
• Guide bars, pulleys, cams, valves, ball joints, hinges and slides
• Cutting tools, taps, dies and pistons
• Handling equipment, conveyors, hoists, lifts, doors and fans

Features

• Extreme pressure additives for longer lasting lubrication
• PTFE additive that minimises surface contact and friction to reduce wear and extend equipment life
• Low viscosity film penetrates cracks, crevices and joints
• High surface tension: spreads a thin, even film and displaces moisture and surface contaminants
• Falex Load Test (ASTM D-3233): 3,750 lbs

Key specifications

Choosing the right option

For a dry film PTFE lubricant see CRC Aerosol Dry Glide With PTFE 150g; for a general multi-purpose lubricant see CRC 5-56 Multi-Purpose Lubricant. Each has its own data sheet and hazard classification.

See also: CRC Aerosol Dry Glide With PTFE 150g, CRC 5-56 Multi-Purpose Lubricant, CRC Aerosol Wire Rope & Cable Lubricant 285g, CRC Aerosol Extreme Duty Silicone Lubricant 300g.

Using it

Shake well.

Freeing rusted parts: spray liberally and allow to penetrate. Use a mild abrasive or wire brush on heavy rust, and repeat if needed.

Lubricating: spray an even coat, and reapply after the first coat has penetrated.

Corrosion protection: apply an even coat over all metal parts and do not wipe off the film.

Storage and handling

Protect from sunlight and do not expose to temperatures above 50 °C. Keep away from heat and ignition sources. Do not pierce or burn the can, even after use. The pressurised container may burst if heated.

Limits and safety

Hazard classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Causes skin irritation (H315), may cause an allergic skin reaction (H317) and causes serious eye irritation (H319). May cause drowsiness or dizziness (H336). Suspected of damaging fertility or the unborn child (H361). May cause damage to organs through prolonged or repeated exposure (H373). Toxic to aquatic life with long lasting effects (H411). Transport class UN 1950, Aerosols, Class 2.1. The NSF H2 registration is not a food grade (H1) listing. Read the safety data sheet before use.