*** This is old stock but in good condition. There are no returns. You are welcome to inspect at our office if required..***

Gates Hi-Power II Dubl-V Belt, BB Section

• Gates Hi-Power® II Dubl-V belt is characterized by a double-V profile. It uses flex-bonded tensile cords, which are highly resistant to flexing forces, and FlexWeave® Cover for extended protection.
• It is the ideal solution for “serpentine” drives (drives with counter rotating shafts) where power is transmitted from both the top and bottom of the belt.

Construction

• Classical cross-section
• Unique recessed top and bottom
• Fibre-loaded compound for improved belt stability
• Gates Curves provide full contact with pulley grooves for uniform loading of cords, uniform wear and increased belt life
• Flex-Bonded polyester cords for equal load distribution and reduced stress from flexing
• Flex-Weave® cover is a patented fabric construction for longer life, providing extended protection to the belt core from oil, dirt and heat
• Non self-igniting - the belt will not catch fire from heat build-up, even with severe slippage
• Static conductive - ISO 1813 and RMA IP3-3

Advantages

• Premium performance
• Power transmission from both sides of the belt
• Premium performance
• Excellent performance/cost ratio
• Suitable for dirty/dusty environments
• Match free system: meets Gates V80® tolerances, can be installed without matching
• Tolerates mild clutching or drive slip

Temperature Range

• -35°C to +60°C

Dimensions

• Section: BB
• Width (mm): 17
• Height (mm): 13
• Effective Length (inch): 60
• Belt Code: BB60