WD-40 Specialist Silicone Lubricant - 21136
- WD-40 Specialist® Silicone Lubricant safely lubricates, resists water and protects metal and non-metal surfaces such as rubber, plastic and vinyl.
- Once dried, this formula leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt.
- This silicone lubricant spray is great for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more.
- Effective in-use temperatures ranging from -100° F to 500° F.
Features
- Providing 50% greater wear protection, our industrial formula delivers the ultimate lubrication for less frequent reapplications.*
- Lubricates 6x longer than the competition.**
- 50-state VOC compliant
- NSF Category H2 (#146863)
* Test Lab: WD-40 Co. Technical Center (Pine Brook, NJ); ASTM D4172; Test dates: 03/2023; 06/2024
** Test Lab: WD-40 Co. Technical Center (Pine Brook, NJ); ASTM D4172 - Modified (Duration: 15min, 30min, 3h); Test dates: 06/2024; 07/2024
Applications
- Cables
- Pulleys
- Guide Rails
- Valves
- Linkages
- Hinges
Directions
- Shake can well.
- Flip straw up for narrow spray or down for wide spray.
- Apply by spraying directly on surface to be lubricated and protected.
- Dries in seconds.
Physical & Chemical Properties
| BOILING POINT (INITIAL) |
221°C (430°F) |
SPECIFIC GRAVITY |
Not Determined |
| SOLUBILITY IN WATER |
Insoluble |
pH |
Not Applicable |
| VAPOR PRESSURE |
0.07 mmHg @ 25°C |
VAPOR DENSITY |
5.3 (Petroleum Solvent) |
| PERCENT VOLATILE |
>80% |
VOC |
20% |
| COEFFICIENT OF WATER/OIL DISTRIBUTION |
Not Determined |
APPEARANCE/ODOR |
Colorless liquid with a petroleum odor. |
| FLASHPOINT |
<-30°C (-22°F) (CC ASTM D3828) |
FLAMMABLE LIMITS |
LEL: 0.6% UEL: 5.0% |
Storage
- Store in a cool, well-ventilated area, away from incompatible materials. Do not store in direct sunlight or above 120°F. U.F.C (NFPA 30B) Level 3 Aerosol.
