Pferd Combiclick Disc Non Woven Soft Satin Finish

• Combiclick - Soft Satin Finish NON WOVEN DISC CC-VRW 115 A (FINE)
• Suitable for general work on metal surfaces e.g. removal of rough grinding traces, removal of oxidation and for light deburring work.
• Abrasive: Aluminium oxide A
• Suitable for very fine grinding on moderate and coarse surfaces and contours, and for cleaning metal and painted surfaces. Achieve matt and satin-finished surfaces. Highly open structure.

• Removing heat discolouration on components made of stainless steel (INOX)
• Fine-grinding of large surfaces in equipment, tank and pressure vessel constructions
   

• COMBICLICK non-woven discs VRH achieve their best performance at a recommended cutting speed of 20 m/s.
• This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Product benefits

• Can be used for wet and dry working.
• The open structure and high flexibility of the non-woven material prevents tool clogging.

Materials that can be worked:

• Aluminium
• Cobalt-based alloys
• Other non-ferrous metals
• High-temperature-resistant materials
• Nickel-based alloys (e. g. Inconell and Hasteloy)
• Bronze
• Hard non-ferrous metal
• Titanium
• Titanium alloys
• Copper
• Soft non-ferrous metal
• Brass
• Stainless steel (INOX)
• Thermoplastics
• Fibre-reinforced duroplastics (GRP, CRP)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Steel materials with a hardness over 54 HRC
• Steel, cast steel
• Steels up to 1,200 N/mmŒ_ (< 38 HRC)
• Cast steel

Applications:

• Roughening
• Deburring
• Surface work
• Cleaning
• Weld dressing
• Structuring (matt finishing, brush matting and satin finishing)
• Fine grinding in multiple steps

Drive types:

• Angle grinder
• Cordless angle grinder