Description

Pferd Fan Grinder Zirconia Alumina

Specially designed for work on stainless steel (INOX) and high-temperature-resistant alloys.
Active grinding additives in the coating significantly improve stock removal, prevent clogging and result in cooler grinding.

Abrasive: Zirconia alumina Z-COOL

Advantages:

High flexibility
High stock removal due to the aggressive coated abrasive
Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners.

Recommendations for use:

Mounted flap wheels achieve their best performance at a recommended cutting speed of 15-20 m/s. This provides an ideal compromise between stock removal, surface quality, thermal load on the workpiece and tool wear.
Flexible shafts, electric and air-powered straight grinders can be used as tool drives
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes:

For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
Safety is only guaranteed if:
The clamping depth is at least 15 mm
The specified maximum rotational speed for unsupported shank lengths is not exceeded