Pferd Policap Abrasive Cap Ceramic Oxide C Shape

• POLICAP Abrasive Cap Ceramic Oxide (CO-COOL - Reduced Heat) - C Shape PC 0713 C 80 Grit
• Abrasive: Ceramic Oxide COOL
• POLICAPå¬ tools have a seamless design and the entire tool surface can be used.
• Matching, reusable holders are available for using abrasive caps and cones.
• The high degree of fitting accuracy between the components ensures that the abrasive caps and cones remain securely attached to the holder during use.

• Because of slots, the holder expands during use, guaranteeing that the abrasive cap/ cone is firmly clamped in place
• Good dimensional stability and excellent fine grinding thanks to a special manufacturing process
• Easy tool change

• Fine grinding in tool and mould construction
• Finishing on turbine blades after repair
• Feather edging of radii at transitions after milling frames in aircraft construction
• Fine grinding of hard-to-reach areas and bores
• Levelling of transitions in fitting and pump construction

• Abrasive caps and cones can be mounted and removed by turning them slightly to the right
• Abrasive caps and cones are easier to replace when the holder is mounted on the tool drive
• Abrasive caps and cones achieve their best performance at a recommended cutting speed of 10̐20 m/s

• The maximum permitted peripheral speed is 25 m/s
• For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times

Specifications

• Cap Size mm:7 x 13
• Grit:80