Description

Pferd Policap Cap Abrasive Ceramic Oxide C Shape

POLICAP Abrasive Cap Ceramic Oxide - C Shape
Abrasive: Ceramic Oxide COOL
POLICAP tools have a seamless design and the entire tool surface can be used. Matching, reusable holders are available for using abrasive caps and cones. The high degree of fitting accuracy between the components ensures that the abrasive caps and cones remain securely attached to the holder during use.

Advantages

Because of slots, the holder expands during use, guaranteeing that the abrasive cap/ cone is firmly clamped in place
Good dimensional stability and excellent fine grinding thanks to a special manufacturing process
Easy tool change

Application examples

Fine grinding in tool and mould construction
Finishing on turbine blades after repair
Feather edging of radii at transitions after milling frames in aircraft construction
Fine grinding of hard-to-reach areas and bores
Levelling of transitions in fitting and pump construction

Recommendations for use

Abrasive caps and cones can be mounted and removed by turning them slightly to the right
Abrasive caps and cones are easier to replace when the holder is mounted on the tool drive
Abrasive caps and cones achieve their best performance at a recommended cutting speed of 20 m/s

Safety notes

The maximum permitted peripheral speed is 25 m/s
For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times