AutoTech Epoxy Floor Coating Range — Quick Reference
AutoTech = specialist EPOXY FLOOR COATING systems for INDUSTRIAL + COMMERCIAL + DOMESTIC concrete floors. AIMS stocks AutoTech range for workshop + factory + showroom + garage floor finishing.
| AutoTech Product | Best For |
|---|---|
| Industrial Epoxy Floor Coating | Workshop + warehouse + sustained traffic |
| Commercial Floor Coating | Showroom + reception + commercial |
| Domestic / Garage Floor | Home garage + workshop finishing |
| Primer / Sealer | Concrete prep + adhesion |
| Topcoat (Various Colours) | Wear + colour + UV protection |
| Anti-Slip Additive | Slip-resistance + safety compliance |
| Chip / Flake System | Decorative speckled finish |
Critical: Concrete must be CLEAN + DRY + PROPERLY PREPARED — surface prep = 80% of finish success. Acid etch + grinding + diamond polish for adhesion. Temperature + humidity affect cure — work in spec range. Allow full cure (typically 7 days) before heavy traffic. Brand: AutoTech. Companion: specialty paint + coatings, paints + equipment, concrete anchors.
AutoTech Epoxy Floor Coatings at AIMS Industrial
AutoTech specialises in epoxy floor coating systems designed for industrial, commercial and domestic concrete floors. AIMS Industrial stocks AutoTech epoxy floor coating and decorative flakes — a straightforward system for producing a durable, attractive floor finish.
AutoTech Products at AIMS
The AutoTech Epoxy Floor Coating (Solvent Based) is a hard-wearing coating formulated for concrete surfaces in workshops, garages, warehouses and factories. It provides a tough, easy-to-clean surface that resists oils, fuels and general chemical spills. The AutoTech Epoxy Decorative Flakes are broadcast onto the wet coating to create a textured, decorative finish that adds slip resistance and visual appeal.
Practical Flooring for Industry
AutoTech floor coatings are suited to environments where a durable, professional floor finish matters — workshop floors, plant rooms, production areas and commercial spaces all benefit from a quality epoxy coating that stands up to daily wear.
If you need advice on the right coating system for your floor or want to discuss quantities and application, contact our team. AIMS Industrial has been supplying Australian industry since 1988.
People Also Ask — AutoTech
Q: What does the AutoTech epoxy floor coating system include?
The AutoTech system is a solvent-based epoxy floor coating paired with AutoTech Epoxy Decorative Flakes, which are broadcast onto the wet coating to create a textured, decorative finish that adds slip resistance and visual appeal alongside the coating itself.
Q: Why does surface preparation matter so much for an epoxy floor coating?
Surface preparation accounts for around 80% of finish success. The concrete must be clean, dry and properly prepared — acid etching, grinding or diamond polishing are the methods used to get the surface ready for adhesion before the coating goes down.
Q: How long before a newly coated AutoTech epoxy floor can take heavy traffic?
Allow a full cure — typically 7 days — before putting the floor under heavy traffic. Temperature and humidity affect the cure, so work within the coating's specified conditions rather than rushing it.
Q: What's the AutoTech decorative flake system used for?
The AutoTech Epoxy Decorative Flakes are broadcast onto the wet coating to build a textured, speckled decorative finish, which adds both slip resistance and visual appeal to the finished floor.
Q: Is AutoTech epoxy coating suitable for both workshop and showroom floors?
Yes — the same AutoTech range spans industrial epoxy coating for workshops and warehouses under sustained traffic, commercial floor coating for showrooms and reception areas, and a domestic/garage option for home workshop finishing.