Bramley Pipe Bender Range — Quick Reference
Bramley is the established Australian pipe + tube bending brand — used by plumbers, refrigeration techs, electricians, HVAC, and maintenance crews. Selection turns on tube material (copper/steel/conduit), OD, and operation (hand vs mechanical vs hydraulic).
| Bender Type | Best For | Tube Size Range |
|---|---|---|
| Hand Bender (Lever) | Soft copper tube — plumbing + refrigeration | 6mm – 22mm OD copper |
| Geared Hand Bender | Larger copper + thin-wall steel | 15mm – 28mm OD |
| Mechanical (Stand-Mounted) Bender | Heavier copper + electrical conduit + light pipe | 15mm – 50mm OD |
| Hydraulic Bender | Heavy steel pipe + EMT conduit + structural | 20mm – 75mm OD |
| Conduit Bender (Electrical) | EMT + RMC conduit — electrician's tool | 16mm – 50mm conduit |
| Tube Cutter (Companion Tool) | Clean tube cuts before bending | Per tube range |
| Bender Accessories (Formers, Followers) | Per bender model — size-specific | Per bender |
Critical bending rule: Match bender SIZE to tube OD exactly — using a 22mm bender on 19mm tube crimps the wall. Mark bend point clearly + use degree indicator on bender lever. ALWAYS bend cold (heat changes the metal structure on copper + steel). Brand: Bramley. Companion: copper pipe, conduit, pipes/tubes/fittings, hand tools.
Bramley Pipe Benders & Tube Bending Tools
Bramley is an established name in pipe bending and tube bending tools, widely used by plumbers, electricians, HVAC technicians, and maintenance tradespeople across Australia. Their range covers hand benders, mechanical benders, and accessories for bending copper tube, steel pipe, conduit, and other tubular materials to precise angles without crimping or collapsing the tube wall. AIMS Industrial supplies Bramley pipe bending tools for trade and industrial use.
Hand Pipe Benders
Bramley hand pipe benders are lever-operated tools that form bends in soft tube — predominantly copper — by drawing the material around a formed shoe. They are compact, portable, and require no external power source. Standard hand benders are sized to suit specific tube outside diameters and are available in sizes covering the common copper tube sizes used in plumbing and refrigeration. Each bender clearly indicates the degree of bend on the former, allowing accurate repeatable bends without the need for a protractor or angle gauge.
Conduit Benders
Conduit bending is a fundamental skill in electrical installation. Bramley conduit benders are designed for PVC and steel conduit and allow the electrician to produce accurate offsets, saddles, and set bends in the field. Like copper tube benders, conduit benders are sized to the conduit outside diameter. Getting the correct size for your conduit is essential — a bender sized for 20 mm conduit will not produce a clean bend on 25 mm material.
Mechanical and Hydraulic Benders
For heavier steel tube, thicker wall section, or high-volume bending, Bramley's mechanical and hydraulic bending equipment provides the leverage and repeatability that hand tools cannot. Hydraulic pipe benders work by pressing the material around a die under controlled hydraulic pressure, allowing accurate bending of heavy-wall steel tube, structural sections, and hard copper. Die sets are interchangeable to cover different tube sizes and profiles.
Selecting the Right Bender
The key selection criteria are material type, outside diameter, and wall thickness. Copper tube benders are not suitable for steel pipe — the forming geometry is different. Always match the bender shoe or die to the exact tube OD you are working with. Using an incorrectly sized bender causes oval distortion or collapse at the bend, which weakens the joint and creates a flow restriction in fluid systems.
Order Bramley Tools from AIMS
AIMS Industrial stocks Bramley pipe bending tools for plumbers, electricians, and maintenance tradespeople across Australia. If you need help identifying the right bender size or configuration for your work, contact our team and we will point you in the right direction.