Buy Epoxy Ceramic Repairs Online in Australia
Epoxy Ceramic Repair Compound Selection — Quick Reference
Ceramic-filled EPOXY REPAIR COMPOUNDS restore + protect surfaces subject to SEVERE ABRASION + EROSION + CORROSION + CHEMICAL ATTACK. AIMS stocks DEVCON range for pumps + impellers + tanks + chutes + worn equipment.
| Epoxy Ceramic Type | Best For |
|---|---|
| Devcon Brushable Ceramic | Smooth wear-resistant coating — pump impellers |
| Devcon Trowellable Ceramic | Heavy wear + thickness rebuild — chute lining |
| Devcon Wear-Resistant Putty | High-impact + abrasion zones |
| Devcon Pumice Reinforced | Maximum erosion resistance |
| Ceramic Bead-Filled | Maximum hardness — production wear surfaces |
| High-Temperature Ceramic | Service to 200°C+ |
| Chemical-Resistant Ceramic | Acid / alkali / chemical exposure |
| Surface Primer / Activator | Adhesion prep — see primers |
Critical: Surface prep CRITICAL — abrasive blast + degrease + activator. Cure time + temperature MUST match spec — premature loading = failure. Useful FAR beyond their cost saving worn pump / impeller / chute. Brand: Devcon. Companion: epoxy structural adhesives, adhesives + sealants, Loctite.
Epoxy Ceramic Repair Compounds
Ceramic-filled epoxy repair compounds restore and protect surfaces subject to severe abrasion, erosion, corrosion and chemical attack. AIMS Industrial stocks repair compound systems from Devcon and Loctite, used throughout Australian industry for plant maintenance, pump repair, pipe rehabilitation and protection of worn equipment surfaces.
What Are Ceramic Epoxy Repairs?
Ceramic epoxy systems are two-component thermoset compounds filled with ceramic, aluminium oxide or tungsten carbide particles. When mixed and applied, they cure to a hard, wear-resistant coating or rebuild that bonds directly to prepared metal surfaces — restoring geometry, sealing damage and protecting the substrate from further wear. Unlike welding or machining, ceramic epoxy repairs can be applied in-place without heating or specialised equipment.
Devcon Wear and Repair Products
Devcon's range of ceramic-filled epoxy compounds covers a wide range of rebuild and protection applications:
- Titanium Putty — high-strength, non-sagging repair compound for rebuilding damaged equipment surfaces, filling gouges, pitting and erosion damage on pumps, impellers and pipe bends
- Wear-Plate — smooth-grade ceramic epoxy applied as a lining to protect surfaces from abrasion and particle erosion in chutes, hoppers, pump casings and cyclone liners
- WR-2 Ceramic Rebuild — an alumina ceramic-filled compound designed for high-wear applications including slurry pumps, dredge components and abrasive media handling equipment
Loctite Ceramic Repair Systems
Loctite EA 3472 and EA 3474 ceramic-filled epoxy compounds are used for corrosion protection, surface repair and rebuilding worn components where chemical resistance and surface hardness are critical. Their paste consistency makes them well-suited to vertical and overhead surface applications.
Surface Preparation
Proper surface preparation is critical — the substrate must be clean, dry and mechanically abraded or grit-blasted to achieve the full bond strength. Both Devcon and Loctite repair systems are supplied with detailed mixing and application instructions. For advice on the right ceramic repair compound for your application, contact our team. AIMS Industrial has been supporting Australian industry since 1988.