Hex Bolts & Nuts

Hex Bolts & Hex Nuts — Metric & Imperial Fasteners

Hex bolts and hex nuts are the most widely used structural fasteners in industrial, construction, and machinery applications. AIMS Industrial sells hex bolts and matching hex nuts in metric and imperial sizes — Grade 8.8 and 10.9 alloy steel, hot-dip galvanised, and 316 stainless steel — for the full range of industrial fastening applications from M6 to M36.

Hex Bolts & Nuts We Stock

• Grade 8.8 Hex Bolts: Metric Grade 8.8 zinc-plated hex head bolts (DIN 931 partially threaded, DIN 933 fully threaded) — the standard general-purpose structural and machinery bolt grade in ISO metric systems. Minimum tensile strength 800 MPa; yield strength 640 MPa.
• Grade 10.9 Hex Bolts: Metric Grade 10.9 alloy steel hex bolts for high-strength applications — minimum tensile strength 1,040 MPa. Grade 10.9 is specified for structural connections in machinery frames, high-load joints, and applications where a smaller fastener must carry a Grade 8.8 load.
• Hot-Dip Galvanised Hex Bolts & Nuts: HDG hex bolts and nuts for outdoor structural, civil infrastructure, mining, and agricultural applications. Hot-dip galvanising provides 80–100 micron zinc coating thickness — significantly greater corrosion resistance than electro-zinc plated fasteners in exposed outdoor conditions.
• 316 Stainless Steel Hex Bolts & Nuts: 316 ss hex bolts and matching nuts for marine, coastal, chemical, and food processing environments. 316 provides superior chloride resistance to 304 — required for coastal structures, marine fittings, and chemical plant.
• Matching Nuts: Hex nuts matched to bolt grade — Grade 8 nuts with Grade 8.8 bolts; Grade 10 nuts with Grade 10.9 bolts. Stainless nuts with stainless bolts. Always use matching or superior-grade nuts to avoid thread stripping under bolt preload.

Hex Bolt & Nut Specification Guide

• Fully Threaded vs Partially Threaded: Partially threaded hex bolts (DIN 931) have an unthreaded shank below the head — the shank fits the joint hole in bearing contact. Fully threaded hex screws (DIN 933) suit applications where thread runs to the bolt head. For structural shear connections, partially threaded bolts with shank in the shear plane are preferred.
• Bolt Length Selection: Bolt length should provide a minimum of 2–3 thread pitches protruding beyond the nut after full tightening. Excessive length wastes material and adds protruding thread hazard; insufficient length reduces thread engagement and joint integrity.
• Tightening to Specification: Structural hex bolt assemblies should be tightened to the specified torque using a calibrated torque wrench. Never estimate torque by feel — under-torqued joints relax under vibration; over-torqued joints damage threads and reduce clamping force.

Australian Business, Local Supply: As a proudly Australian business since 1988, we stock locally and work with trusted local Australian manufacturers and distributors to ensure fast, reliable supply.

Expert Support: Need help buying the right product for your application? Contact our team for application-specific advice or request a quote.

See our full fasteners range including hex head flanged bolts, hex set bolts, and hex lock nuts.