Weld-Aid

Weld-Aid Anti-Spatter Sprays, Nozzle Cleaners & MIG Wire Lubricants

Weld-Aid is a specialist welding consumables brand — now part of the CRC Industries family — whose products solve the three most persistent productivity and quality problems in MIG and flux-cored welding: spatter adhesion to the workpiece, spatter build-up inside the welding torch nozzle, and erratic wire feed caused by friction and contamination in the wire liner.

These problems are not minor inconveniences; they directly reduce welding productivity, increase rework and grinding time, cause torch downtime for nozzle cleaning, and shorten the service life of expensive welding consumables.

Weld-Aid products address each of these issues with purpose-formulated chemical solutions that are used daily in fabrication shops, structural steel workshops, mining maintenance bays, and pipeline welding operations across Australia.

The Weld-Aid range, available through AIMS Industrial, includes three product categories: anti-spatter sprays and gels for workpiece and nozzle protection, nozzle-cleaning compounds for removing accumulated spatter from MIG torch nozzles and contact tips, and wire lubricants and cleaning pads that condition the welding wire as it feeds through the liner to the contact tip.

Each product is specifically formulated for the welding environment — resistant to the extreme heat at the arc, non-contaminating to the weld metal, and compatible with all common shielding gases and welding wire types. The CRC Weld-Aid branding reflects the acquisition of the original Weld-Aid brand by CRC Industries, combining Weld-Aid's welding-specific expertise with CRC's global manufacturing and distribution infrastructure.

AIMS Industrial stocks the full CRC Weld-Aid consumable range for Australia-wide delivery, serving fabrication shops, structural steel manufacturers, mining maintenance workshops, pipeline contractors, and any operation running MIG or flux-cored welding equipment.

For welding supervisors and production managers, the cost of spatter is often underestimated — it is not just the grinding time to remove spatter from the workpiece, but also the torch downtime for nozzle cleaning, the premature replacement of nozzles and contact tips clogged with spatter, and the weld quality defects caused by erratic wire feed through a contaminated liner.

Weld-Aid products attack all three cost drivers simultaneously, and the return on investment is typically measured in days rather than months for any shop running multiple MIG welding stations.

Across structural steel fabrication, pressure vessel manufacturing, mining equipment repair, shipbuilding, and general engineering, Weld-Aid consumables are found wherever MIG and flux-cored welding is performed at production volumes.

The anti-spatter products reduce post-weld grinding by preventing spatter from bonding to the parent metal surface — the spatter still lands, but it sits on a release film and flicks off with a light brush or compressed air blast instead of requiring angle grinder removal.

Nozzle cleaners and dip gels extend torch service life by keeping the gas nozzle bore clear and the shielding gas flow consistent, which directly improves weld quality and reduces porosity defects.

Wire lubricants ensure smooth, consistent wire feed that eliminates the birdnesting, stuttering, and burn-back problems that plague poorly maintained wire feed systems.

• CRC Weld-Aid Weld-Kleen HD Anti-Spatter 20oz (566g): Heavy-duty anti-spatter spray for application to the workpiece surface before welding. Weld-Kleen HD deposits a thin, heat-resistant release film that prevents molten spatter from bonding to the parent metal, allowing spatter to be brushed or blown off after welding without grinding. The HD (Heavy Duty) formulation provides a more robust release layer than standard anti-spatter sprays, suited to high-amperage MIG and flux-cored processes that generate heavy spatter loads. The 566 g aerosol can provides generous coverage for production welding environments where workpiece preparation with anti-spatter is a standard pre-weld step.
• CRC Weld-Aid Weld-Kleen 350 Anti-Spatter: General-purpose anti-spatter spray suitable for workpiece and fixture protection across a wide range of MIG, flux-cored, and stick welding applications. The Weld-Kleen 350 formulation provides effective spatter release on mild steel, structural steel, and low-alloy steel surfaces without contaminating the weld zone or interfering with subsequent painting, coating, or galvanising processes. The non-flammable, water-based formula makes it safer to use in enclosed workshops and fabrication bays than petroleum-based anti-spatter sprays. A versatile, everyday anti-spatter product for welding shops that process a variety of materials and joint configurations.
• CRC Weld-Aid Nozzle-Kleen #2 Anti-Spatter 16oz (453g): Purpose-formulated anti-spatter spray for MIG torch nozzles, contact tips, and gas diffusers. Nozzle-Kleen #2 coats the inside of the gas nozzle with a release film that prevents spatter from accumulating and restricting the shielding gas flow — the primary cause of porosity, oxidation, and contamination defects in MIG welding when the torch is not maintained. Regular nozzle treatment with Nozzle-Kleen extends the interval between manual nozzle reaming or replacement, maintaining consistent gas coverage at the weld pool and reducing torch downtime for cleaning. The 453 g aerosol provides enough product for frequent nozzle treatment across multiple welding stations.
• CRC Weld-Aid Nozzle-Dip HD Anti-Spatter Dip Gel 32oz (946ml): High-viscosity dip gel for immersing MIG torch nozzles and contact tip assemblies to apply a thick, durable anti-spatter coating that lasts longer than spray-applied products. The welder dips the hot torch nozzle directly into the gel container — the heat activates the gel and deposits a thick, even coating on the nozzle interior and tip. The HD gel formulation provides extended spatter resistance for high-amperage, high-duty-cycle welding operations where spray-applied anti-spatter burns off too quickly. The 946 ml container sits at the welding station for convenient dip application between weld runs or during natural breaks in the welding sequence.
• CRC Weld-Aid Lube-Matic Black Pre-Treated Lube Pad: Pre-treated wire lubricating pad that clamps around the welding wire between the spool and the drive rolls, cleaning and lubricating the wire as it feeds through. The black pad is pre-loaded with Weld-Aid wire lubricant formulation that reduces friction in the liner, eliminates birdnesting and stuttering feed problems, and extends liner life by reducing the abrasive wear that contaminated wire causes inside the liner conduit. Installed in seconds on any standard MIG wire feeder — the wire passes through the pad and exits clean and lubricated for smooth, consistent feeding all the way to the contact tip.
• CRC Weld-Aid Lube-Matic Red Cleaning Pad: Dry cleaning pad for removing surface contamination, oxidation, and dust from welding wire without adding lubricant. The red cleaning pad suits applications where wire cleanliness is critical and additional lubricant is not desired — such as TIG filler wire preparation, critical weld procedures requiring ultraclean wire, and operations using pre-lubricated wire where additional lubricant could cause excess smoke or weld contamination. Installs in the same position as the black lube pad, clamping around the wire path to mechanically clean the surface as it feeds through. A simple, effective quality control measure for any welding operation.
• CRC Weld-Aid Lube-Matic Wire Kleener & Lubricant 142g: Combined wire cleaner and lubricant compound in a 142 g stick format for recharging Lube-Matic pads or direct application to welding wire, liners, and feed system components. The Wire Kleener compound dissolves surface contamination and deposits a thin lubricant film that reduces wire-to-liner friction across the full length of the liner conduit. Used to refresh pre-treated lube pads when their original lubricant charge is depleted, or applied directly to the liner during routine torch maintenance. The stick format provides precise application without mess, and the 142 g size lasts through hundreds of wire spool changes in a production welding environment.

Buy Weld-Aid welding consumables at AIMS Industrial alongside our Welding, Abrasives & Cutting, and Safety collections.

Order online, Contact our team for assistance or to Request a quote.