Instructions:
1. Wipe up any excess oil.
2. Shake can well.
3. Hold can upside down 150mm directly above the stain.
4. Spray stained area, extending application 20mm past the stain.
5. Allow to dry completely to a powder – 1-2 hours depending on the temperature, humidity and ventilation.
6. Once completely dry sweep or vacuum up the remaining powder. On rough or porous surfaces, brushing or hosing off with water may be required.
7. Is some staining remains, reapply, scrub with stiff bristled brush and repeat steps 5 and 6. (May not remove all stains.)