Rocket Crimped Circular Wheel 150 x 25mm, Multi Bore RB150M | RB150M

The Rocket RB150M is a 150 x 25 mm crimped steel wire wheel with a multi bore for bench grinders, rated to 6,000 rpm.

Crimped wire is used for surface deburring, polishing and surface preparation, and acts less aggressively than twisted wire. The multi bore takes 23 mm, 19 mm, 16 mm, 12 mm and 1/2 in arbors.

Where this product is used

• Surface deburring and polishing
• Rust, glue, rubber and residue removal from metal surfaces
• Weld cleaning
• Workshop and maintenance cleaning

Features

• 150 x 25 mm crimped steel wire wheel
• Multi bore, for bench grinders
• Maximum speed 6,000 rpm
• Crimped wire for surface deburring, polishing and preparation
• 0.35 mm wire
• Can be fitted on selected bench machines
• Multi bore sizes: 23 mm, 19 mm, 16 mm, 12 mm and 1/2 in

Key specifications

Selecting the right option

Check that the bore, or the multi-bore sizes, suit the arbor on your machine, and that the wheel width fits inside the guard. Match the brush to your machine and do not run it above its maximum speed rating. Wear eye protection and gloves when brushing, because wire can break off during use. Check site rules before using any wire brush where flammable gas or dust may be present.

Related products

See also SIT Steel Crimped Wire Wheel, Multi Bore - 150mm to 250mm, SIT Steel Crimped Wire Wheel 200 x 36mm, Multi Bore 4204 and SIT Steel Crimped Wire Wheel 200 x 50mm, Multi Bore 4206.