***Illustrations shown may vary from actual product***
Seco Turning Insert C Shape Code 4.76 x 0.8 x 12.7mm T Insert Type - F1 7° Grade TK1501 ± 0.13/± 0.08mm CCMT120408-F1 Pack of 10
Turning Insert C Shape Code T Insert Type - F1 7° Grade TK1501 - ± 0.13/± 0.08mm Tolerance
- C shape code.
- T Insert Type.
- 7° insert side clearance angles.
- ± 0.13/± 0.08mm tolerance.
TK1501 Insert Grade
- CVD Coated.
- Duratomic® grade. A highly wear-resistant grade for cast irons in general as well as in steels.
- The grade is particularly capable in the machining of ductile (nodular) cast irons also in more demanding setups and interrupted cuts.
- Ti(C,N) + Al2O3 + Used Edge Detection (Chrome)
F1 Chipbreaker Programme
- Chipbreaker for positive inserts. Positive geometry with a sharp cutting edge gives easy-cutting properties.
- Suitable for high feed rates at fine depths of cut in precision forgings and castings.
- Indicative machining range: f = 0,1-0,5 mm/rev, ap = 0,2-3,0 mm.
- Machining in bar automatics, for instance: f = 0,08-0,25 mm/rev, ap = 1-3 mm.
About Seco Turning Insert
- Anything is possible when it comes to our broad selection of general turning grades and chip breakers.
- Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.
- to boost the productivity and tool life in your turning applications.
- Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.
