Typhoon Tools 1/2" Drive 10-27mm Deep Impact Socket Set, 14 Pieces

The Typhoon Tools 72501 is a 14 piece deep impact socket set with a 1/2" drive. It has metric sockets in 14 sizes from 10mm to 27mm, and every socket is 80mm long. Deep sockets reach down over a long stud or bolt end to get onto the nut. Impact sockets are built for impact wrenches and air tools. They are made from chromium-molybdenum steel (Cr-Mo) with thick walls to absorb shock, and a black phosphate finish that resists corrosion. Each socket has retention holes and grooves for retaining rings. A ring clips the socket onto the anvil of the impact tool so it stays put.

If the nut is easy to get at, the standard length set (72500) is shorter and handier. The 28 piece set (72506) has both lengths in the same sizes. The 20 piece set (72542) is standard length and goes up to 36mm. Always wear eye protection when using impact equipment, and do not hold the socket while it is working.

Where this product is used

• Nuts on long studs and threaded rod with an impact wrench
• Recessed nuts and bolts that a standard socket cannot reach
• Automotive, truck and machinery maintenance

Features

• 14 piece 1/2" drive set in deep length
• Metric sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm
• Deep length sockets, 80mm long in every size
• Torque rate of 153 N.m at 10mm, rising to 570 N.m from 21mm up
• Impact rated design, built to withstand high torque and vibration from impact tools
• Chromium-molybdenum steel (Cr-Mo) for strength, toughness and wear resistance
• Thick socket walls absorb and dissipate shock, which reduces the chance of socket failure
• Black phosphate finish is a corrosion resistant coating that extends tool life
• Precision machined for a tight tolerance fit on fasteners, which reduces wear on the anvil, socket and fastener
• Retention holes and grooves for retaining rings that keep the socket on the impact tool anvil

Key specifications

Supplied with

• 14 deep length 1/2" drive metric impact sockets, 10 to 27mm