Buy Angle Clamps Online in Australia
Angle clamps hold two pieces square to each other so both hands are free to fit up and fix the joint. This range has 5 listings, all from Strong Hand: four corner pliers and angle clamping tools, and a MagVise with adjustable spindle.
What's in the range
| Type | Listings | What's there |
|---|---|---|
| Corner pliers and angle clamping tools | 4 | 32 mm, 76 mm and 90 degree x 76 mm corner pliers, plus the UDL365 90 degree corner clamp, 50 mm |
| MagVise | 1 | Strong Hand MagVise with adjustable spindle |
Choosing an angle clamp
Match the size to the section you are holding. The Strong Hand corner pliers are listed by size (32 mm, 50 mm and 76 mm), so check that the section fits within the clamp's capacity. Pads wear and can be replaced, so it is worth knowing the series before you order. Always check the data sheet.
Related ranges
For pads, spindles and spares see Clamp Accessories. Other ways to hold work: Clamps, Bar Clamps, C-Clamps, Hold-Down Clamps, Locking Pliers and Vices.
Order from AIMS Industrial
AIMS Industrial has supplied Australian industry since 1988. Call us on (02) 9773 0122, contact the team or request a quote and we'll help match the right clamp to your job.
Angle Clamp FAQs
What is a corner plier or angle clamping tool used for?
It holds two pieces at 90 degrees to each other while you position and fix them, so you do not need a second pair of hands or a separate square.
Which size should I choose?
Choose the size that fits the section you are holding. The listings here are 32 mm, 50 mm and 76 mm, plus a 90 degree x 76 mm tool. Check capacity on the data sheet, or call us and we will help.
Can I get replacement pads?
Yes. The Clamp Accessories collection lists Strong Hand pads, including a V-pad for the WAC35-SW welders angle clamp. Check the series code on your clamp before you order.