Buy Belt & Wheel Sanders Online in Australia
Belt + Wheel Sander Selection — Quick Reference
Bench-top belt sanders + disc sanders = ESSENTIAL machine tools for DEBURRING + SHAPING + STOCK removal. Workshop + production + carpentry + metalwork. Match belt width + disc size + tilt table to typical work.
| Belt / Wheel Sander Type | Best For |
|---|---|
| Bench Belt Sander (75mm / 100mm) | Workshop bench-top — small parts |
| Combination Belt + Disc Sander | Versatile workshop standard |
| Heavy-Duty Industrial Belt Sander | Production + larger work |
| Linisher (Vertical Belt) | Long parts + see linishers |
| Tilt Table | Angle work + bevel grinding |
| Mitre Gauge | Precise angle |
| Dust Collection Port | Workshop dust management |
| Replacement Belts | Match width + grit to work |
Critical: PPE — face shield + dust mask + apron mandatory. Use dust collection — silica + wood + paint dust = WHS hazard. Belt direction matters — workpiece moves WITH belt direction. Brands: Linishall, Metabo. Companion: linishers, sanding belts, machinery.
Belt & Wheel Sanders
Bench-top belt sanders and disc sanders are essential machine tools for deburring, shaping, stock removal and surface finishing on metal and timber components. AIMS Industrial stocks belt and wheel (disc) sanders and combination belt-disc units for workshop, trade and light industrial use.
Belt Sanders
Bench belt sanders use a continuous abrasive belt driven between two rollers to provide a flat, fast-cutting sanding surface. The workpiece is presented to the moving belt for aggressive stock removal, edge shaping and surface cleaning on flat and contoured components. Available in horizontal (flat platen) and vertical configurations, with belt sizes typically from 50mm x 686mm for small bench units to 150mm x 1220mm for heavier-duty machines. The contact wheel (rubber-covered driving roller) allows curved surface finishing when the belt is used at the end of the machine without the platen backing.
Disc Sanders
Bench disc sanders use a rotating circular abrasive disc for fast flat-face grinding, end-grain shaping and squaring of timber and light metalwork. The combination table with adjustable mitre guide allows accurate angle sanding for joints and compound shapes. Disc diameters range from 200mm for light workshop use to 300mm on heavier trade machines.
Combination Belt-Disc Machines
Combination units provide both a belt and a disc sanding surface in a single bench-top footprint — the practical choice for workshops where space is limited and both operations are needed regularly. For help selecting the right belt or disc sander for your workshop, contact our team. AIMS Industrial has been supporting Australian workshops since 1988.
People Also Ask — Belt & Wheel Sanders
Q: What's the difference between a belt sander and a disc sander?
A belt sander uses a continuous abrasive belt driven between two rollers, giving a flat, fast-cutting surface for aggressive stock removal, edge shaping and surface cleaning. A disc sander instead uses a rotating circular abrasive disc for fast flat-face grinding, end-grain shaping and squaring, typically with a combination table and adjustable mitre guide for accurate angle work.
Q: What belt sizes do bench belt sanders come in?
Belt sizes typically range from 50mm x 686mm on small bench units up to 150mm x 1220mm on heavier-duty machines.
Q: What's the contact wheel for on a belt sander?
The contact wheel is the rubber-covered driving roller at the end of the machine. Using the belt against it, without the flat platen behind it, lets you finish curved or contoured surfaces rather than just flat ones.
Q: What disc diameters do bench disc sanders come in?
Disc diameters range from 200mm for light workshop use up to 300mm on heavier trade machines.
Q: When would a combination belt-disc sander make more sense than two separate machines?
When bench space is limited and you need both belt and disc sanding operations regularly — a combination unit gives you both surfaces in a single bench-top footprint instead of running two machines.