Buy Check Valves Online in Australia
Check + Foot Valve Selection — Quick Reference
Check valves + foot valves = ESSENTIAL components controlling flow DIRECTION RELIABLY — preventing backflow that would damage equipment or contaminate supplies. Pump installations + hydraulic + pneumatic standard.
| Check / Foot Valve Type | Best For |
|---|---|
| Spring-Loaded Check Valve | General reliable check — workshop standard |
| Swing Check Valve | Lower pressure drop — larger flow |
| Ball Check Valve | Slurry + dirty liquid + simple |
| Lift Check Valve | High pressure + clean fluids |
| Foot Valve (Pump Intake) | Pump suction — maintains prime |
| Wafer-Style (Compact) | Between flanges — space saver |
| Brass / Stainless / Cast Iron | Match to media + pressure |
| Threaded vs Flanged | Match to connection type |
Critical: Foot valves on pump suction LINE maintain prime — without one, pump loses prime + cavitates. Install spring check valves with arrow in FLOW DIRECTION. Match material to media. Companion: valves, ball valves, pumps + fluid handling.
Control Flow Direction Reliably with Industrial Check and Foot Valves
Check valves and foot valves are essential components in any pipeline or fluid handling system where backflow prevention is required. Check valves allow flow in one direction and automatically close when flow reverses — protecting pumps, compressors and downstream equipment from reverse pressure damage.
Foot valves are installed at the inlet of pump suction lines to maintain prime and prevent draining when the pump stops. AIMS Industrial stocks 26 check and foot valves from AAP and Dixon across wafer, swing and bronze construction types.
We sell check and foot valves from AAP and Dixon — industrial valve and fluid handling specialists supplying pipeline, pumping and fluid management solutions across Australia.
The Check & Foot Valves Range
Our product range covers wafer check valves, swing check valves and brass and bronze variants for water, fuel and general industrial fluid applications.
- AAP: AAP supplies check and foot valves including Wafer Check Valves in Single Disc and Dual Disc configurations, Brass Check Valve E-Type and Bronze Swing Check Valves. AAP wafer check valves install between flanges without additional valve body bolting, making them compact and suitable for space-constrained pipeline installations. The dual disc wafer format provides faster closing response to reduce water hammer in high-velocity systems.
- Dixon: Dixon supplies check and foot valve products including brass and stainless steel varieties. Dixon is a global fluid handling components manufacturer — their valve range covers water, chemical and general industrial fluid applications with consistent quality and broad size availability.
Choosing the Right Check or Foot Valve
Valve selection depends on the fluid type, line size, installation orientation, operating pressure and the specific backflow prevention or pump priming requirement.
- Wafer vs Swing Check Valve: Wafer check valves (single and dual disc) are compact, install between pipe flanges and are suited to horizontal or vertical pipeline runs. Swing check valves use a hinged disc that swings open with forward flow and closes under reverse pressure — they have lower pressure drop but require horizontal installation for reliable closing.
- Brass vs Bronze Construction: Brass check valves are the standard choice for water, compressed air and general industrial fluids. Bronze valves offer better corrosion resistance for saltwater, marine and chemical-adjacent applications. Stainless steel variants are used for food-grade and highly corrosive fluid applications.
- Foot Valves for Pump Priming: Foot valves are installed vertically at the base of suction lines in sumps, tanks and water sources. They maintain pump prime by holding water in the suction line when the pump is idle, preventing the pump from losing prime and needing manual repriming between cycles.
Expert Support: Need help buying the right product for your application? Contact our team for application-specific advice or request a quote.
Australian Business, Local Supply: As a proudly Australian business since 1988, we stock locally and work with trusted local Australian manufacturers and distributors to ensure fast, reliable supply.
Also see our relief valves, ball valves, gate valves, butterfly valves and pumps & fluid handling ranges.