Buy Circular Saw Blades Online in Australia
Circular Saw Blade Selection — Quick Reference
Circular saw blade selection drives cut quality + tool life + operator safety. Match by material being cut (timber/steel/SS/specialty) + tooth count + blade material (HSS vs TCT vs cermet vs diamond).
| Blade Type | Material Cut | Tooth Count Guide |
|---|---|---|
| TCT Timber Blade (24-40T) | Hardwood + softwood + nail-embedded timber + sleepers | 24T rip / 40T general / 60T+ fine finish |
| TCT Thin-Kerf Blade | Battery-tool optimised — reduced power draw | Per blade diameter |
| TCT Stainless Steel Cutting | SS sheet + plate up to ~3mm | 60-80T high tooth count for clean cut |
| TCT Aluminium / Non-Ferrous | Al + brass + copper — wax-lubricated typical | Negative-rake teeth, 80T+ fine |
| HSS Blade (Older Standard) | Mild steel + workshop general (legacy use) | Replaced largely by TCT + cermet |
| Cermet / Carbide Blade | Production steel + thin-wall pipe cutting | 60-100T fine for clean cuts |
| Diamond Blade — Continuous Rim | Tile + ceramic + glass — smooth fine cuts | N/A — continuous edge |
| Diamond Blade — Segmented | Concrete + brick + masonry — fast | N/A — segmented rim |
| Rotary Hacksaw Blade | Mechanical hacksaw / cold saw — production steel | HSS or cermet, 60-120T |
| Specialty Panel Blade | Composite + laminate + fibre cement | Diamond-tipped or specialty TCT |
Critical: Match blade MAX RPM to tool spec — exceeding RPM = catastrophic blade failure. Tooth count rule: more teeth = cleaner cut but slower; fewer teeth = faster but rougher. NEVER use timber blade on metal — heat + tooth design = blade failure. Match arbor (centre hole) diameter to saw spec. Brands: Austsaw, Bordo, Sutton Tools, Excision. Companion: Austsaw range, diamond saw blades, cut-off discs.
Circular Saw Blades for Wood, Stainless Steel, Specialty Materials and Rotary Hacksaw Cutting from AUSTSAW, Bordo, Sutton Tools and Excision
AIMS Industrial sells an extensive range of circular saw blades from Bordo, Sutton Tools and Austsaw & Excision, covering TCT (tungsten carbide tipped) blades for timber, hardwood, nail-embedded wood and sleepers, thin-kerf general purpose blades, stainless steel cutting blades, rotary hacksaw blades and specialty panel-cutting blades. Whether cutting standard framing timber, rough recycled hardwood, stainless steel sheet or composite panel materials, we have the blade specification for the job.
Some Blade Types in Our Range
- AUSTSAW Extreme Wood with Nail Blade: TCT circular saw blades designed to cut through nail-embedded, recycled or rough-sawn timber without damaging the blade. Used in demolition, construction and recycling applications where embedded nails, screws or fixings are present in the material.
- AUSTSAW Extreme Stainless Steel Blade: Circular saw blades formulated for cutting stainless steel sheet and tube. Correct blade selection for stainless steel is critical — standard steel blades will overheat, work-harden the cut edge and fail prematurely.
- AUSTSAW Redgum Sleeper Blade: 235mm (9-1/4") blade with 25mm bore and 6-tooth configuration for cutting extremely hard and dense timbers including railway sleepers, ironbark and redgum. The low tooth count and heavy-duty TCT tips are designed to handle the abrasive, silica-rich nature of hardwood sleepers.
- AUSTSAW Rotary Hacksaw Blade: Specialty circular saw blade designed for cutting thin-walled steel tube, angle iron, flat bar and metal sections in a circular saw. Offers an alternative to an angle grinder cut-off wheel for straighter, more controlled metal cuts.
- AUSTSAW Panel Cutter: 150mm specialty blade with four cutting edges for cutting composite panels, laminates and thin sheet materials. The panel cutter design minimises tear-out on finished surfaces.
- Bordo Rapidcut Thin Kerf Blade: Thin-kerf TCT circular saw blade for fast, clean cuts in standard framing and construction timber. The reduced kerf width means less material removed per cut, faster cutting speed and less load on the saw motor.
Expert Support: Need help buying the right product for your application? Contact our team for application-specific advice or request a quote.
Australian Business, Local Supply: As a proudly Australian business since 1988, we stock cutting tools and blades from trusted brands for trade and industrial customers across Australia.
Also see our bandsaw blades, reciprocating saw blades and cutting wheels ranges.