Buy Containers & Funnels Online in Australia
Container + Funnel Selection — Quick Reference
Effective management of workshop FLUIDS — lubricating oils + coolants + hydraulic fluid + solvents + fuel — requires RIGHT CONTAINERS + dispensing tools. Compliance per AS 1940 for hazardous materials storage.
| Container / Funnel Type | Best For |
|---|---|
| Workshop Funnel (Standard) | Pouring oil + fluid into machinery |
| Long-Reach Funnel | Restricted access tank fills |
| Filter Funnel (Built-In Mesh) | Removing contamination during transfer |
| Anti-Static Funnel (Earthing) | Flammable liquid transfer |
| Plastic Storage Container (Workshop) | Small parts + consumables |
| Metal Storage Container | Heavy duty + chemical-resistant |
| Drum + IBC Tap / Faucet | 200L drum + IBC dispensing |
| Jerry Can (Approved) | Fuel transport — AS 2906 compliant |
| Spill Tray / Drip Pan | Spill containment under storage |
Compliance: AS 1940 for dangerous goods storage + AS 2906 for fuel containers. Match container CHEMISTRY to media — plastic incompatible with some solvents. Companion: funnels, spill control, drum handling.
Containers & Funnels
Effective management of workshop fluids — lubricating oils, coolants, hydraulic fluid, solvents, and fuel — requires the right containers and dispensing equipment. Pouring from bulk drums without appropriate funnels, spouts, or containers leads to spills, contamination, and wasted product. AIMS Industrial supplies a practical range of workshop containers, oil cans, jerry cans, and dispensing funnels for fluid management in workshops, maintenance environments, and industrial facilities.
Oil Cans and Dispensing Equipment
Oil cans for workshop lubrication come in two main forms: lever-action pump oil cans for directed spot lubrication of bearings, chains, and machine points, and trigger-type oilers for lighter oils and fine application. Both types are available in a range of capacities (250mL to 1L is the typical workshop range). Spout length and flexibility determine access to recessed lubrication points — flexible extension spouts are essential for bearings that sit deep within machinery or guarding. Trigger pump bottles suit lightweight machine oil and general-purpose lubricants where a fine controlled squirt is preferred over the pressure of a lever-action can.
Fuel and Chemical Jerry Cans
UN-approved jerry cans for fuel and chemical storage are manufactured to a standard that ensures the container is safe for transport and storage of flammable and hazardous liquids. UN approval requires that the container has been tested for drop, stack, and liquid compatibility — containers without UN approval should not be used for regulated flammable or hazardous substances. Polyethylene cans suit water, most acids, and alkalis; steel cans are the correct choice for fuel and solvent storage where static discharge risk must be managed.
Funnels
Workshop funnels direct fluid transfer without spillage. Flexible-spout steel funnels suit oil and fuel transfer into recessed fill points. Polyethylene and polypropylene funnels are chemically resistant and suit a broader range of fluids including acids and alkalis. Funnel mesh filters prevent debris entering the receiving tank during transfer — important when topping up hydraulic systems or precision equipment where contamination is a concern.
Spill Prevention and Workplace Compliance
Spill containment is a regulatory requirement when storing or handling significant quantities of liquid chemicals. Even in workshop settings, having appropriate containment — drip trays, bunded storage, and proper dispensing equipment — reduces the environmental and safety risk of liquid handling. Selecting the correct container material for the chemical stored is equally important: hydrofluoric acid will attack polyethylene; concentrated nitric acid requires a specific container grade; and fuel storage in non-approved containers creates fire risk and may breach site compliance requirements. For fluid management product recommendations, contact our team.