Buy Degreasers Online in Australia
Grease, oil, carbon and general grime slow down maintenance, contaminate parts before assembly or bonding, and create slip and fire hazards on the workshop floor. AIMS Industrial stocks 21 degreasers and related cleaning chemicals — aerosol spot cleaners, bulk and concentrate degreasers, contact and electrical cleaners, and specialist metal surface cleaners — from CRC, Triple7, WD-40, Applied, Loctite, Dy-Mark, Pferd, Tap Magic and Re-Po.
The right degreaser depends on what you're removing (light oil vs baked-on grease vs carbon), what you're cleaning (steel, stainless, electrical contacts, painted surfaces), and how you want to apply it (aerosol spot clean vs bulk dip or parts washer). Use the quick reference below to narrow it down, or get in touch and we'll help you match a product to the job.
Quick Reference — Degreaser Types We Stock
| Formulation | Typical Use | Application Method | Example Products |
|---|---|---|---|
| Solvent-based degreaser | Cutting heavy grease, oil and carbon on metal parts and machinery | Apply neat or diluted per label; spray, brush or dip, then wipe or rinse | Applied APPSOLV M17, Applied ATOOR Tough Orange, Tap Magic Multi Purpose Cleaner/Degreaser |
| Citrus / bio-based degreaser | General workshop cleaning where a lower-odour or bio-based product is preferred | Spray or wipe on, agitate, then wipe or rinse off | Triple7 All Purpose Degreaser, Triple7 Aircraft & Metal Cleaner, Dy-Mark Protech Bio Degrease, WD-40 Fast Acting Citrus Degreaser |
| Aerosol spot cleaner | Fast, targeted cleaning of components, tools, small parts and pre-bond surfaces | Spray direct, wipe or allow to flash off | Dy-Mark Protech Heavy Duty Degreaser, Loctite SF 7063 General Purpose Cleaner |
| Contact & electrical cleaner | Electrical contacts, switchgear, sensors and connectors | Spray onto the de-energised component and allow to evaporate — no residue | CRC Contact Cleaner, CRC Automotive Electronic Cleaner |
| Metal surface cleaner | Post-grinding and post-weld clean-up on stainless and mild steel | Apply, agitate with a pad or brush, then rinse | Pferd Inox Shiner IS-S 500, Pferd Universal Cleaner UC-S 500 |
| Parts-washer degreaser | High-volume dip or recirculating parts-washer cleaning | Dilute into the parts washer reservoir per label | Applied A8413 Parts Washer Degreaser |
The AIMS Degreasers Range, Formulation by Formulation
Solvent-Based Degreasers
Solvent-based degreasers cut fastest through heavy oil, grease and carbon build-up and generally need no rinsing — they lift the contaminant and evaporate clean. Applied APPSOLV M17 is a general-purpose solvent degreaser for workshop and maintenance cleaning, while the Applied ATOOR Tough Orange Extra Heavy Duty Cleaner & Degreaser is built for tougher, more stubborn soiling. Tap Magic's Multi Purpose Cleaner/Degreaser doubles as a corrosion inhibitor, useful around machining and tapping work where you want a clean surface that won't flash-rust. Always check the label and SDS for ventilation and PPE requirements before use — see Safety & Handling below.
Citrus & Bio-Based Degreasers
Triple7 is the bio-based specialist in the range — the Triple7 All Purpose Degreaser is a bio-based, multi-use degreaser for general workshop grease and grime, and the Aircraft & Metal Cleaner is formulated for cleaning metal surfaces where a milder, lower-odour chemistry is preferred. Dy-Mark Protech Bio Degrease covers the same ground from the Dy-Mark stable, and the WD-40 Fast Acting Citrus Degreaser (400g aerosol) gives you a citrus-based option in a ready-to-use spray can for engines, machinery and tools.
Aerosol Spot Cleaners
For quick, targeted jobs, aerosol cleaners save time over decanting bulk product. The Dy-Mark Protech Heavy Duty Degreaser (400g) handles general workshop degreasing from the can, while the Loctite SF 7063 General Purpose Cleaner (400ml aerosol) is a fast-drying cleaner suited to preparing surfaces and components before bonding or sealing — check compatibility with the specific substrate and adhesive you're using.
Contact & Electrical Cleaners
CRC Contact Cleaner and the CRC Automotive Electronic Cleaner (350g) are formulated for electrical and electronic components — contacts, switchgear, sensors, connectors — evaporating without leaving a conductive residue behind. As with any electrical cleaner, always isolate and de-energise the component first and follow the label directions.
Metal Surface Cleaners
Pferd's metal cleaners are a different job again — they're finishing products used after grinding or welding to clean up stainless and mild steel surfaces, restoring a uniform finish. The Inox Shiner IS-S 500 is formulated for stainless steel, and the Universal Cleaner UC-S 500 for mild steel — pair either with Pferd's grinding and finishing tools as part of a fabrication clean-up process.
Parts-Washer Degreasers
Running a dip tank or recirculating parts washer? The Applied A8413 Parts Washer Degreaser is a concentrate designed to be diluted into the washer reservoir, giving you an economical, repeatable clean for high-volume component washing rather than one-off aerosol spraying.
Also in This Range
This collection also carries a few related workshop products worth knowing about, none of which are degreasing chemicals themselves: CRC Glass Cleaner, CRC Leak Detector (water-based, for finding gas and air leaks), CRC So Easy Protectant, CRC Moto Plastic Polish, CRC Lanoshield Natural (a lanolin-based protectant/light lubricant), the CRC Angled Brush parts-washer accessory, and Re-Po Kromebrite Liquid Chrome Enamel for restoring a chrome-look finish once a surface is clean.
Application Method: Aerosol vs Bulk/Concentrate
Aerosols suit spot cleaning, field servicing and jobs needing a controlled, targeted spray with no mixing. Bulk and concentrate products work out more economical for regular, high-volume cleaning in dip tanks and parts washers. Always follow the dilution ratio on the label — over-diluting slows cleaning, under-diluting wastes product and can be harder on some substrates.
Safety & Handling
Solvent-based degreasers can be flammable and may need adequate ventilation — always read the label and Safety Data Sheet (SDS) before use and follow the PPE it specifies (typically gloves and eye protection at minimum). Don't mix different degreaser chemistries together. Test on a small, hidden area first if you're unsure how a product will react with paint, soft plastics or rubber. Used degreaser is generally treated as industrial waste, not something to tip down a drain — check your state EPA's requirements. Need an SDS? Contact our team and we'll get it to you.
Industries & Applications
AIMS supplies degreasers into general engineering and fabrication, automotive and fleet maintenance, manufacturing and machine shops, electrical maintenance, and welding and metal finishing work — from prepping a surface before bonding, to cleaning contacts on a control panel, to cleaning up a weld on stainless steel.
Brands We Stock
This collection draws on nine established maintenance chemical and metal-finishing brands: CRC, Triple7, WD-40, Applied, Loctite, Dy-Mark, Pferd, Tap Magic and Re-Po.
Companion Ranges
- Parts Washers & Cleaners — dip tanks and recirculating washers to pair with our parts-washer degreasers
- Lubrication — greases, oils and multi-purpose lubricants for after the degreasing's done
- Personal Protective Equipment (PPE) — eye protection and general workwear for chemical handling
- Chemical Resistant Gloves — gloves rated for solvent and degreaser contact
- Rust Treatments & Undercoats — for surfaces once they're clean and dry
- Cutting Lubricants — cutting and tapping fluids for machining work
Order from AIMS: Need help picking the right degreaser, or want a quote for bulk quantities? Call our team on (02) 9773 0122, contact us online, or request a quote and we'll help you get the right product and pack size for your workshop.
Frequently Asked Questions
What's the difference between a solvent-based and a bio-based degreaser?
Solvent-based (Applied APPSOLV M17, Applied ATOOR Tough Orange) cuts faster through heavy grease and doesn't need rinsing, but can be flammable and needs good ventilation. Bio-based (Triple7's range, Dy-Mark Protech Bio Degrease) is milder and lower-odour, suited to routine cleaning.
Which degreaser should I use for general parts cleaning?
For hand cleaning, Triple7 All Purpose Degreaser or Applied APPSOLV M17 are solid general-purpose choices. Running a dip tank or parts washer? Applied A8413 Parts Washer Degreaser concentrate is built for that.
Can I use these degreasers on painted surfaces or soft plastics?
Not always — some solvent-based degreasers can affect paint, soft plastics and rubber seals. Check the label for surface compatibility, and test on a small, hidden area first if unsure.
What's the difference between an aerosol and a bulk degreaser?
Aerosols (Loctite SF 7063, Dy-Mark Protech Heavy Duty Degreaser, CRC's contact and electronic cleaners) suit quick, targeted spot cleaning. Bulk and concentrate products cost less per litre and suit regular, high-volume cleaning in a dip tank or parts washer.
Can I use a degreaser on electrical components?
Use a product formulated for it, such as CRC Contact Cleaner or the CRC Automotive Electronic Cleaner — these evaporate cleanly without leaving a residue that could affect conductivity. Always isolate and de-energise the component first.
What's a bio-based or citrus degreaser, and when should I choose one?
Bio-based and citrus degreasers use plant-derived solvents instead of petroleum-based ones. They suit routine cleaning and sites with tighter chemical management policies. For heavier, baked-on contamination, a solvent-based product will generally still cut faster.
How should I dispose of used degreaser?
Used degreaser — especially solvent-based product — is generally treated as industrial waste and shouldn't go down a drain. Requirements vary by state and council, so check with your local EPA and your site's waste procedures.
Do I need PPE to use these products?
Yes — check the label and SDS, which specify the PPE required (typically gloves and eye protection, plus ventilation for stronger solvent-based products). We can supply the current SDS for any product in this range on request.
What's the best product for cleaning up stainless steel after grinding or welding?
Pferd's Inox Shiner IS-S 500 is formulated for stainless steel surface finishing after grinding, and the Universal Cleaner UC-S 500 for mild steel. These are finishing cleaners rather than general degreasers, best paired with Pferd grinding and finishing tools.
Can I mix different degreasers together?
No — don't mix different degreaser chemistries in the same container or tank. Use one product at a time and rinse or flush equipment between chemical types.
Does AIMS supply degreasers in bulk for larger workshops?
Yes — several products, including the Applied and Triple7 lines, come in concentrate and larger pack formats suited to high-volume use. Contact our team or request a quote for bulk pricing.
How do I decide between the brands AIMS stocks?
All nine brands — CRC, Triple7, WD-40, Applied, Loctite, Dy-Mark, Pferd, Tap Magic and Re-Po — are established maintenance chemical or metal-finishing suppliers, each covering a slightly different niche. Not sure which fits your job? Give our team a call.