Epirez Range — Quick Reference by Application
Epirez is the Australian-engineered epoxy brand for heavy industry, mining and civil construction — precision grouts, floor coatings, anti-slip surfaces, concrete repair and crack injection. Selection turns on the project type: machinery installation (precision grouting), floor systems (coating + topcoat), structural repair, or maintenance.
| Application | Epirez Products | Best For |
|---|---|---|
| Precision Machinery Grouting | Chockfast Red, Chockfast Orange, V1 Heavy Duty Grout | Pump baseplates, motor installations, compressor skids, vibration-prone machinery |
| Epoxy Floor Coatings | Epoxy 600, Floor Coat WB, High-Build Epoxy | Workshop floors, warehouse floors, factory production floors |
| Polyurethane Floor Coatings | PolyDeck, PU Topcoat | Chemical-resistant flooring, food processing, exterior trafficable surfaces |
| Anti-Slip / Safety Coatings | Epirez Safety Anti-Slip, Aggregate-broadcast systems | Walkways, ramps, wet areas, mining steps & platforms |
| Concrete Repair Mortars | Quikset Mortar, Fibrecrete, Trowelable Epoxy Mortar | Spalled concrete, structural patching, slab edge repair |
| Crack Injection Systems | Epirez Crack Injection epoxy, low-viscosity formulations | Structural crack repair, water leak stabilisation, vertical/horizontal cracks |
| Specialty Coatings | Tank linings, secondary containment, chemical-resistant systems | Tank farms, bund linings, plant areas exposed to chemicals |
Epirez products require correct substrate preparation — concrete must be mechanically prepared (diamond grind / shot-blast) and cleaned before application. Cure times vary by product (typically 6-24 hours initial cure; full cure 7 days). For technical support on epoxy system selection across machinery / flooring / repair projects, call (02) 9773 0122. Companion ranges: industrial adhesives, paints & equipment.
Epirez Epoxy Grouts, Floor Coatings & Repair Compounds
Epirez is a trusted Australian brand of high-performance epoxy systems used across heavy industry, mining, infrastructure and civil construction. The Epirez range covers precision epoxy grouting for machinery installation, epoxy and polyurethane floor coatings, anti-slip safety coatings, concrete repair mortars and crack injection systems — all engineered for the demanding load and chemical exposure conditions found in Australian industrial environments. AIMS Industrial stocks the Epirez product range for maintenance engineers, project managers and facility teams requiring reliable, long-service structural and flooring solutions.
Epirez Epoxy Grouting — Machinery Installation & Chockfast
Precision epoxy grout is the foundation of correct machinery installation — absorbing dynamic loads, resisting vibration and maintaining alignment under continuous operation. Epirez epoxy grouts are formulated for high compressive strength and chemical resistance, making them the correct choice for pump bases, compressor foundations, gearbox plinths and structural anchor grouting. The Chockfast Orange system from Epirez is widely specified by OEMs and project engineers across mining and marine applications for its combination of mechanical performance and extended working time in hot ambient conditions.
- Epirez High Performance Epoxy Grout 280S: High-strength, low-shrinkage epoxy grout for precision machinery installation, pump bases and equipment foundations; suitable for dynamic load and continuous vibration applications
- Epirez Heavy Duty Backing Grout 5137: Heavy-duty backing grout for crane rails, rail tracks and heavy machinery where extreme compressive loads and impact resistance are required
- Epirez Chockfast Orange Epoxy Chocking Compound: The internationally recognised standard for marine and mining machinery chocking; excellent flow properties and extended pot life make it suitable for large pours in elevated ambient temperatures
Epirez Floor Coatings, Anti-Slip Treatments & Concrete Repair
Epirez floor coatings and repair systems address the full lifecycle of industrial concrete surfaces — from initial application through to maintenance and remediation. The Safe Step anti-slip coating system is widely used on stairways, walkways and access platforms across mining, manufacturing and petrochemical sites to meet Australian workplace safety requirements. Concrete crack repair and highway patch products complete the offering for civil and maintenance teams managing high-traffic floor and pavement surfaces.
- Epirez Safe Step 100 Anti-Slip Coating: Durable anti-slip floor coating for stairways, ramps and walkways; meets workplace safety requirements for high-traction surfaces in wet or oily industrial environments
- Epirez Crack Repair Epoxy Sealer: Low-viscosity epoxy sealer for filling and sealing hairline cracks in concrete floors and structures; restores structural integrity and prevents moisture and chemical ingress
- Epirez Highway Patch Rapid Repair Mortar: Fast-setting repair mortar for concrete floors, pavements and industrial surfaces subject to heavy traffic; achieves working strength in under 30 minutes for minimal downtime
Browse Epirez epoxy grout, structural adhesives & coatings at AIMS Industrial alongside our Workshop Supplies, Fasteners & Fixings, and Safety & PPE collections. Order online or contact our team for expert advice or to request a quote.
People Also Ask — Epirez Industrial Adhesives
Q: What is Epirez?
Epirez is an Australian-owned industrial adhesives and protective coatings manufacturer (since 1965). Their range covers high-strength epoxy adhesives, structural urethanes, concrete repair compounds, anti-corrosion coatings, and specialty industrial adhesives. Made in Sydney with Australian formulations suited to local conditions and substrates. Used in mining, marine, construction, and general industrial repair where premium adhesive performance and Australian technical support matter.
Q: Epirez vs Loctite vs Devcon — what's the difference?
Different specialties: Loctite (Henkel) is the threadlocker and retaining compound specialist with the broadest range. Devcon (ITW) is the repair compound specialist — Plastic Steel for casting repair. Epirez is the structural epoxy and protective coating specialist — concrete bonding, structural adhesive, and corrosion coatings. For most workshops, all three brands have a place: Loctite for fasteners, Devcon for casting repairs, Epirez for structural bonding and coatings.
Q: What's Epirez's flagship product?
The Epirez Resilient and Epirez 633 structural epoxy ranges are the recognised workshop products — high-strength adhesives for steel-to-steel, steel-to-concrete, and concrete repair applications. Specifically formulated for Australian temperatures and humidity. Also widely used: Epirez Strucsteel for structural metal bonding, Epirez 9100/9200 epoxies for chemical environments, and Epirez Polyflex for flexible joints.
Q: How long does Epirez epoxy take to cure?
Depends on the specific product and temperature. Standard 5-minute epoxy: handling strength 5-10 minutes, full cure 16-24 hours at 25°C. Standard structural epoxy: handling 1-2 hours, full cure 24-48 hours. Higher temperatures accelerate cure (oven cure at 60°C cuts to 4-8 hours). Lower temperatures slow significantly — below 15°C, allow 48-72 hours. Always read the specific product's data sheet for cure profile. Premature load reduces final strength.
Q: Is Epirez food-grade or potable-water-grade?
Standard Epirez industrial epoxies are NOT food-grade. For food-contact applications or potable water (drinking water tanks, pipes), use only AS/NZS 4020 certified products — Epirez offers specific potable-water grades. Check the data sheet for AS/NZS 4020 certification before specifying for any contact application. Don't substitute industrial-grade for potable-water-grade — the certification matters for compliance and food safety.