AIMS Industrial lists 12 Euroboor products for magnetic drilling: 7 annular cutters and 5 accessories. The cutters include HSS black oxide and TCT (tungsten carbide tipped) Weldon cutters, a rail cutter and long series cutters. The accessories cover arbors, an adaptor, an ejection pilot pin and a Weldon shank twist drill. See also our wider range of annular cutters and magnetic drills.
What's in the range
| Type | Listings | What's there |
|---|---|---|
| HSS annular cutters | 2 | 30mm and 55mm Weldon, high speed steel, black oxide |
| TCT annular cutters | 3 | 35mm and 55mm Weldon TCT, plus a 32 x 55mm rail annular cutter |
| Long series cutters | 2 | An 8 piece long series set and a 38 x 100mm TiAlN coated long annular cutter |
| Arbors and adaptors | 3 | MT2 to Weldon arbor with lube ring, MT3 arbor with coolant ring and a Nitto One Touch to 3/4 inch Weldon adaptor |
| Pilot pin and twist drill | 2 | Ejection pilot pin and a Weldon shank HSS twist drill |
Choosing Euroboor cutters and accessories
Start with the machine: check which shank or arbor it takes (Weldon, Nitto One Touch, MT2 or MT3) and pick the cutter and adaptor to suit. Then match the cutter to the job. HSS and TCT cutters suit different materials and production volumes, and cutter diameter and depth are shown in each listing. Remember a pilot pin for each cutter, and use a suitable cutting lubricant. Always check the data sheet for material suitability and operating recommendations.
Related ranges
Order from AIMS Industrial
AIMS Industrial has supplied Australian industry since 1988. Call us on (02) 9773 0122, contact the team or request a quote and we'll help match the right cutter and accessories to your machine.
Euroboor FAQs
What does Weldon shank mean?
A Weldon shank is a round shank with a flat that a set screw locks against. Many annular cutters use it, so your magnetic drill needs an arbor or chuck that accepts it. The Euroboor adaptors and arbors listed here are there to help with that.
Which accessories do I need to run an annular cutter?
You need a pilot pin to centre the cutter and eject the slug, and an arbor or adaptor that suits your machine. Euroboor lists an ejection pilot pin, MT2 and MT3 arbors and a Nitto One Touch adaptor. Check which fits your drill.
Do you list both HSS and TCT Euroboor cutters?
Yes. The range includes 30mm and 55mm HSS black oxide cutters and 35mm, 55mm and rail TCT cutters, plus long series cutters. Call (02) 9773 0122 if you need help choosing.