Buy Iron Pipe Fittings Online in Australia
Galvanised Malleable Iron Pipe Fitting Selection — Quick Reference
Galvanised malleable iron fittings are screwed-thread fittings for low-medium pressure water, compressed air, gas + steam distribution. Heat-treated cast iron = improved ductility + impact resistance vs grey cast iron. BSP threaded standard (Australian + UK).
| Fitting Type | Configuration | Best For |
|---|---|---|
| Elbow (90° + 45°) | Male-Male, Female-Female, Male-Female | Direction change in water + compressed air distribution |
| Socket / Coupling | Female-Female, equal + reducing | Joining same + step-down pipe lengths |
| Reducing Socket | Step pipe size down | 1" → 3/4" → 1/2" pipework transitions |
| Tee (Equal + Reducing) | Three-way branch | Branch connections in air + water mains |
| Cross (4-Way) | Four-way junction | Manifolds + multi-branch headers |
| Plug + Cap | External + internal thread closures | Plugging unused ports or pipe ends |
| Bush / Hex Bush | Male-Female reducer in single fitting | Pipe step-down in single fitting body |
| Union (3-Piece) | Disconnectable joint | Equipment isolation + maintenance access |
| Flange (Threaded) | Threaded pipe to bolted flange | Equipment connection requiring flanged joint |
| Nipple (Hex + Barrel) | Male-Male short connection | Equipment-to-pipe transitions |
Critical: BSP threads (parallel BSPP or tapered BSPT) — match thread type to fitting + always use PTFE tape or Loctite 567 on tapered BSPT for sealing. Standard pressure rating: 16 bar (232 psi) cold water service. Galvanised coating = corrosion protection — DON'T use ungalvanised malleable iron outdoors or in damp service. Brands: AAP, Dixon. Companion: pipe fittings, brass fittings, pipes/tubes/fittings, Loctite.
Galvanised Malleable Iron Pipe Fittings — Screwed BSP Fittings for Industrial Pipework
Malleable iron pipe fittings are screwed threaded fittings for low-to-medium pressure pipework systems in compressed air, water, gas and steam distribution. AIMS Industrial stocks a range of galvanised malleable iron fittings from AAP and Dixon — including elbows, sockets, reducing sockets, flanges, plugs and pipe in BSP (British Standard Pipe) parallel and taper thread.
What is Malleable Iron?
Malleable iron is cast iron that has been heat-treated (annealed) to improve ductility and impact resistance relative to standard grey cast iron. This makes malleable iron fittings suitable for pipework that may experience vibration, thermal cycling or minor mechanical stress — where brittle grey iron would crack. Galvanised (zinc-coated) fittings provide corrosion protection for compressed air and water service.
The Range
AAP malleable iron fittings cover the core screwed fitting types: elbows (90° for direction changes), sockets (straight couplings and reducing sockets for joining pipes of different sizes), flanges (oval and round, for bolted connections to equipment and vessels), and square head plugs (for closing off pipe ends and test points). Dixon fittings cover additional configurations including screwed round flanges drilled to table D for bolted flange connections.
BSP Thread
All fittings are BSP threaded — the dominant thread standard for industrial and commercial pipework in Australia. BSP (BSPP — parallel) and BSPT (taper) are both used; check the fitting and pipe thread type before assembly. PTFE thread tape is the standard sealant for BSP parallel thread connections.
Applications
Typical applications include compressed air distribution systems, fire protection water mains, steam distribution at low pressures, gas pipework, and general industrial water service. Always verify the pressure rating of the fitting for the specific service — standard malleable iron fittings are rated to approximately 14 bar for water and air service at ambient temperature.
Need help specifying fittings for your pipework system? Contact our team.