Skip to content
Waku - AIMS Industrial Supplies

Waku

WAKU Telescopic Ladders, Hook-On Platforms, Telescopic Planks & Ladder Accessories

WAKU is a telescopic access equipment brand producing aluminium telescopic ladders, hook-on work platforms, telescopic planks, and a complete range of ladder replacement parts and accessories for building, construction, painting, maintenance, property management, and industrial access applications in Australia and internationally.

The fundamental commercial case for a telescopic ladder over a conventional fixed-length extension ladder is transport and storage practicality.

A telescopic ladder at maximum extension provides equivalent working height to a fixed aluminium extension ladder of the same reach, but collapses to a fraction of the transport length — typically fitting in the boot of a passenger vehicle or the cab of a ute without the ladder extending beyond the vehicle body, eliminating the need for roof racks, ladder holders, or a purpose-built trailer for trades workers who routinely carry their access equipment from site to site in their own vehicles.

For maintenance workers, property managers, and tradespersons who use a ladder a moderate number of times per week rather than continuously, the single ladder that stores compactly in the vehicle or in a standard-size storage space at the home or workshop is the practical choice over the specialised transport and storage arrangement that a fixed-length extension ladder requires.

The rung-by-rung extension system of the WAKU telescopic ladder allows the ladder to be set at any intermediate height between minimum and maximum extension — avoiding the situation where a fixed-length ladder extended to the nearest section increment is significantly longer than the access point requires, creating overhang and instability that requires additional support measures.

The WAKU accessory range significantly extends the versatility of the core telescopic ladder: the hook-on platform converts the leaning ladder into a two-handed work position without a separate scaffold; the wall stand-off protects gutters and fragile cladding; the telescopic plank creates a walkable working platform between two WAKU ladders; and the complete replacement parts program ensures that a worn rung cap, lost pin, or damaged rubber foot can be replaced in the field to restore the ladder to safe operating condition without requiring ladder replacement. AIMS Industrial sells the WAKU range for delivery across Australia. Order your WAKU telescopic ladder and accessories today.

WAKU Telescopic Ladders & Working at Height Platforms

WAKU’s ladder and platform range provides compact, one-person portable access solutions for trades workers and maintenance personnel who require practical height access without the transport and storage requirements of full-size extension ladders.

  • WAKU Telescopic Ladder Aluminium: An aluminium telescopic ladder that extends rung by rung from its collapsed transport length to the required working height, and collapses back to a compact boot-sized form for vehicle transport and domestic storage. The rung-by-rung locking extension system allows the ladder to be set at the precise height required for the access point rather than requiring extension to the nearest fixed section length, providing the correct working length without unmanageable overhang above the eave, gutter, or structure contact point.
  • WAKU Hook-On Platform: A hook-on work platform that attaches over WAKU telescopic ladder rungs to provide a flat, stable standing platform at the required working height for two-handed tasks including painting, gutter cleaning, cladding installation, light fitting replacement, and fascia and soffit work. The hook-on platform converts the leaning ladder into a temporary standing platform for work requiring both hands free at height, without the cost, bulk, and setup time of a separate scaffold tower or mobile elevated work platform for the same access point.
  • WAKU Telescopic Plank 2.05–3.50m Length SWL 150kg: An aluminium telescopic plank rated to 150kg SWL for spanning between two WAKU telescopic ladders or between a WAKU ladder and a scaffold standard to create a walkable working platform at height for roof edge work, fascia and gutter installation runs, painting, and linear access tasks requiring movement along a building face at constant height. The telescopic length adjustment from 2.05m to 3.50m accommodates varying ladder spacing without requiring multiple fixed-length planks for different span requirements on a single job site.
  • WAKU Ladder Wall Stand-Off: A wall stand-off attachment for WAKU telescopic ladders that positions the ladder top away from the wall surface at the correct distance to clear gutters, downpipes, fascia boards, and fragile wall cladding materials from direct contact pressure during leaning ladder use. The stand-off also improves structural ladder stability by distributing the wall contact force across two separated contact points rather than the ladder’s standard stile tips, and creates working clearance at roof edge and gutter level for two-handed access work at that height.

WAKU Ladder Replacement Parts & Ground Stability Accessories

WAKU’s replacement parts and ground stability accessory range extends ladder service life beyond individual component failure events and addresses the safe placement requirements of ladder use on varied ground conditions.

  • WAKU Telescopic Ladder Rung Cap — Orange: A replacement orange rung cap for WAKU telescopic ladders that protects the rung end and provides the non-slip contact surface for the rung tip against wall surfaces during leaning ladder use. Replacement of worn, cracked, or missing rung caps restores the anti-slip wall contact performance of the ladder and extends the ladder’s service life beyond what a single damaged cap would otherwise terminate prematurely, without requiring replacement of the full ladder.
  • WAKU Telescopic Ladder Rung Pin: A replacement rung pin for the telescoping lock mechanism that secures each extending rung section at the set height during ladder use. Rung pins are the primary safety-critical locking mechanism of the telescopic ladder — a missing or non-functioning pin at any rung prevents that section from locking in extension, creating a collapse risk at that rung height. Replacement rung pins restore full locking function to the ladder at the damaged rung position without requiring a complete ladder replacement.
  • WAKU Telescopic Ladder Hinge Pin: A replacement hinge pin for WAKU telescopic ladders with hinged rung or fold-flat mechanisms. The hinge pin is the pivot point for the rung folding action that allows the ladder to collapse from extended working height to compact transport length — a bent or damaged hinge pin prevents the rung from folding and locking correctly during collapse or resists smooth extension during setup, requiring replacement to restore safe and reliable ladder operation in both directions of the extend-collapse cycle.
  • WAKU Telescopic Ladder Rubber Feet: Replacement rubber feet for WAKU telescopic ladders to restore the anti-slip ground contact performance of the ladder base after rubber wear, splitting, or loss of the original feet. Ladder feet are the primary safety element preventing base slide-out on smooth floor surfaces during use — worn, hardened, or absent rubber feet significantly increase the risk of base slip on tiles, polished concrete, and smooth timber floors that are the most common domestic and light commercial working surfaces for ladder use.
  • WAKU Ladder Apex (Bow Top): A bow-top apex attachment for WAKU telescopic ladders for stable contact against pitched roof surfaces at ridge, hip, and gable access points where a standard flat stile top cannot be used against a sloped roof surface without rocking and instability. The bow-top geometry provides two separated contact points on the roof slope oriented along the pitch direction for stable two-point bearing against the roof surface without the single-line contact instability of a flat stile tip on a pitched plane.
  • WAKU Ladder Ground Spikes: Ground spike accessories that replace or supplement the standard WAKU rubber ladder feet for stable base contact on soft, loose, and compacted earth surfaces where rubber feet sink into the substrate under ladder load and allow progressive base movement. Ground spikes penetrate the surface layer to provide lateral and forward base displacement resistance on lawn, soft soil, sand, and compacted gravel surfaces where friction from rubber feet is insufficient to prevent base creep during sustained ladder use.
  • WAKU Spikes With Wheels: A combination spike and wheel accessory for WAKU ladders providing ground penetration for lateral base stability combined with wheels that allow the ladder base to be rolled along the ground for repositioning without the full ladder being lifted and relocated. Suited to work requiring frequent ladder repositioning along a building face, scaffold line, or roof edge where lifting and repositioning the full ladder for each new access position is significantly slower than rolling the wheeled base to the next position.
  • WAKU Leg Leveller (Domestic): A leg leveller attachment for WAKU telescopic ladders for stable setup on uneven ground, stepped surfaces, sloped driveways, and garden terrain where one ladder leg is lower than the other and the height difference cannot be compensated by ground preparation without impractical substrate work. The leveller extends the shorter leg independently to equalise the ladder height on both ground contact points, restoring the ladder to vertical on slopes within the leveller’s adjustment range for safe use on the uneven terrain.
  • WAKU Clip-On Attachment for TL22: A clip-on side-rail attachment for the WAKU TL22 telescopic ladder for securing paint brushes, rollers, small tools, and accessory items to the ladder side rail within reach during painting, maintenance, and installation tasks at height. The clip-on attachment reduces the need to descend the ladder to collect tools and materials from a ground-level work area during repetitive at-height tasks, improving efficiency and reducing the fatigue and risk associated with repeated ascent and descent on the same ladder setup.

Shop WAKU telescopic ladders and accessories at AIMS Industrial alongside our PPE and Lifting Equipment collections.

Order online, Contact our team for assistance or to Request a quote.

Quote Cart