IKO RNA6904UU Needle Roller Bearing without Inner Ring 25 x 37 x 30 mm
Available
This page holds two series of IKO machined type caged needle roller bearings without an inner ring and with seals on both sides (UU): 14 sizes of RNA49 UU (16 to 80 mm shaft, models RNA4901UU to RNA4914UU) and 13 sizes of RNA69 UU (16 to 72 mm shaft, models RNA6901UU to RNA6913UU).
Machined type needle roller bearings have a low sectional height and large load ratings. The outer ring is rigid and can be used even in light alloy housings. Both sides carry seals made of special synthetic rubber, which keep dust out and hold the grease in, and the bearing is supplied prepacked with grease.
Without an inner ring the shaft is the raceway, which allows a compact design and lets you choose the radial clearance by the shaft diameter. The shaft needs to be heat-treated and ground; where it cannot be, use a matching inner ring from the ring column of the sizes table.
Where this product is used
- Shafts that are hardened and ground
- Positions where dust may reach the bearing
- Compact shaft supports with a low sectional height
Features
- Machined type caged needle roller bearing without inner ring, seals on both sides (RNA49 / RNA69 series, UU), 27 sizes
- Shaft 16 to 80 mm, outside diameter 24 to 100 mm
- No inner ring: the shaft is the raceway, so a compact design is possible
- Seals on both sides (UU), special synthetic rubber, supplied prepacked with grease
- Basic dynamic load ratings 8.47 to 97.4 kN, static 9.32 to 200 kN
- Allowable rotational speed 2,500 to 12,000 rpm (grease lubrication)
Key specifications
| Specification | Detail |
|---|---|
| Brand | IKO (Nippon Thompson Co., Ltd., Japan) |
| Type | Machined type caged needle roller bearing without inner ring, seals on both sides (RNA49 / RNA69 series, UU) |
| Series | RNA49 UU and RNA69 UU |
| Models | RNA4901UU to RNA4914UU (27 sizes) |
| Roller set bore diameter Fw (shaft diameter) | 16 to 80 mm |
| Outside diameter D | 24 to 100 mm |
| Outer ring width C | 13 to 45 mm |
| Seals | Both sides (UU), special synthetic rubber |
| Inner ring | None: the shaft is the raceway |
| Oil hole | One in the outer ring, with an oil groove |
| Grease | Prepacked |
| Basic dynamic load rating C | 8.47 to 97.4 kN |
| Basic static load rating C0 | 9.32 to 200 kN |
| Allowable rotational speed | 2,500 to 12,000 rpm (grease lubrication) |
Available sizes
Show all 27 RNA49 UU and RNA69 UU sizes
| Model | Fw (mm) | D (mm) | C (mm) | Matching inner ring | C (kN) | C0 (kN) | Speed (rpm) |
|---|---|---|---|---|---|---|---|
| RNA4901UU | 16 | 24 | 13 | LRTZ 121614 | 8.47 | 9.32 | 12,000 |
| RNA6901UU | 16 | 24 | 22 | LRTZ 121623 | 15.5 | 20.4 | 12,000 |
| RNA4902UU | 20 | 28 | 13 | LRTZ 152014 | 9.57 | 11.6 | 9,500 |
| RNA6902UU | 20 | 28 | 23 | LRTZ 152024 | 18.5 | 27.1 | 9,500 |
| RNA4903UU | 22 | 30 | 13 | LRTZ 172214 | 10.3 | 13.1 | 8,500 |
| RNA6903UU | 22 | 30 | 23 | LRTZ 172224 | 19.8 | 30.6 | 8,500 |
| RNA4904UU | 25 | 37 | 17 | LRTZ 202518 | 18 | 20.5 | 7,500 |
| RNA6904UU | 25 | 37 | 30 | LRTZ 202531 | 33 | 44.6 | 7,500 |
| RNA4905UU | 30 | 42 | 17 | LRTZ 253018 | 20.3 | 25.1 | 6,500 |
| RNA6905UU | 30 | 42 | 30 | LRTZ 253031 | 39.2 | 58.7 | 6,500 |
| RNA4906UU | 35 | 47 | 17 | LRTZ 303518 | 21.5 | 28.4 | 5,500 |
| RNA6906UU | 35 | 47 | 30 | LRTZ 303531 | 40.1 | 63 | 5,500 |
| RNA4907UU | 42 | 55 | 20 | LRTZ 354221 | 30.1 | 46.3 | 4,500 |
| RNA6907UU | 42 | 55 | 36 | LRTZ 354237 | 51.6 | 92.6 | 4,500 |
| RNA4908UU | 48 | 62 | 22 | LRTZ 404823 | 37.2 | 58.4 | 4,000 |
| RNA6908UU | 48 | 62 | 40 | LRTZ 404841 | 63.7 | 117 | 4,000 |
| RNA4909UU | 52 | 68 | 22 | LRTZ 455223 | 38.9 | 63.4 | 3,500 |
| RNA6909UU | 52 | 68 | 40 | LRTZ 455241 | 66.6 | 127 | 3,500 |
| RNA4910UU | 58 | 72 | 22 | LRTZ 505823 | 41.3 | 71.1 | 3,500 |
| RNA6910UU | 58 | 72 | 40 | LRTZ 505841 | 70.8 | 142 | 3,500 |
| RNA4911UU | 63 | 80 | 25 | LRTZ 556326 | 52.2 | 85.7 | 3,000 |
| RNA6911UU | 63 | 80 | 45 | LRTZ 556346 | 89.4 | 171 | 3,000 |
| RNA4912UU | 68 | 85 | 25 | LRTZ 606826 | 54.5 | 92.8 | 3,000 |
| RNA6912UU | 68 | 85 | 45 | LRTZ 606846 | 93.4 | 186 | 3,000 |
| RNA4913UU | 72 | 90 | 25 | LRTZ 657226 | 56.8 | 99.8 | 2,500 |
| RNA6913UU | 72 | 90 | 45 | LRTZ 657246 | 97.4 | 200 | 2,500 |
| RNA4914UU | 80 | 100 | 30 | LRTZ 708031 | 76.9 | 143 | 2,500 |
Fw is the roller set bore diameter, D the outside diameter and C the width; C and C0 are the basic dynamic and static load ratings, and speed is the allowable rotational speed for grease lubrication.
Selecting the right option
Choose the size with the Inside Diameter (mm) option, which is the roller set bore diameter Fw (the shaft diameter), and the Width (mm) option. The model number is shown with each variant and in the sizes table.
This page mixes two series, RNA49 UU and RNA69 UU. Confirm the width as well as the shaft diameter, since RNA69 is wider than RNA49 for the same shaft diameter.
The UU in the model number means seals on both sides. The open version of the series has no UU and is on the RNA page.
The matching inner ring for a shaft that cannot be hardened and ground is shown against each size in the sizes table (LRTZ inner rings).
Fitting and use
These bearings are supplied prepacked with grease. The allowable rotational speed in the tables applies to grease lubrication. The outer ring has one oil hole with an oil groove.
The shaft is the raceway, so it needs to be heat-treated and ground. Ask AIMS for the shaft and housing tolerances and the radial clearance that suit your application.
Related products
Parts that go with this range: LRTZ inner rings for a shaft that cannot be hardened and ground; NA49 UU: sealed, with an inner ring; NA69 UU: sealed, with an inner ring; RNA: the open series.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
IKO RNA49 UU and RNA69 UU Needle Roller Bearings without Inner Ring, Seals Both Sides, 16 to 80 mm Shaft (Metric): 25 / 30
SKU: A0155283 | Model: RNA6904UU/IKO
IKO RNA6904UU needle roller bearing without inner ring, seals on both sides, 25 x 37 x 30 mm, C 33 kN. Order online from AIMS Industrial.
