Hobson ASMSPCM061000 M6 Allthread Rod, Class 4.6 UTS, Plain, 1m

The Hobson allthread rod is fully threaded along its length (metric thread, plain finish), supplied in 1m lengths. This page lists 10 items: M6 to M56.

Hobson lists class 4.6 as low tensile carbon steel, and its class and grade chart pairs class 4.6 with imperial grade 2 (manufacturer-stated).

The supplier names these rods Class 4.6 UTS. The Hobson acronym list includes UTS as a tensile strength abbreviation (manufacturer-stated).

The pitch shown for each size is the coarse pitch given in the Hobson thread table (manufacturer-stated).

The supplier description names DIN 975 (manufacturer-stated).

Some items are single lengths and some are packs; the table shows which.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 10 sizes: M6 to M56
• Metric thread, fully threaded along its length
• Plain finish
• Supplied in 1m lengths
• Class 4.6 UTS strength level
• DIN 975 named by Hobson for these items (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; compare the pitch in the table with your nut. The length shown is the full length of the rod; it can be cut to suit. For a different strength level see Hobson Sampsonrod, Class 8.8, Plain, M6 to M52, 1m.

Related products

Related rods: Hobson Left Hand Allthread Rod, Class 4.6 UTS, Plain, M6 to M48, 1m, Hobson Allthread Rod, Class 4.6 UTS, Zinc Plated, M3 to M48, 1m and Hobson Nylon Allthread Rod, M4 to M30, 1m.