Hobson Threaded Rod, M10

There are 7 items: M10 to M36. These rods are G4.6 (class 4.6). Class 4.6 is low tensile carbon steel, and corresponds to imperial grade 2.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 7 sizes: M10 to M36
• Metric thread, fully threaded along its length
• Galvanised finish
• Supplied in 1m lengths
• G4.6 strength level

Key specifications

Choosing the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. The length shown is the full length of the rod; it can be cut to suit. For a different strength level see Hobson Sampsonrod, Class 8.8, Plain, M6 to M52, 1m.

Related rods: Hobson Metric Fine Allthread Rod, Class 4.6 UTS, Plain, M10 to M20, 1m, Hobson M16 Allthread Rod, Class 4.6 UTS, Zinc Plated, 600mm, Pack of 10 and Hobson Allthread Rod, Class 4.6 UTS, Hot Dip Galvanised, M12 and M16, 110 to 600mm Lengths.