Hobson R88MG121002 M12 Threaded Rod, G8.8, Galvanised, 1m

The Hobson threaded rod is fully threaded along its length (metric thread, galvanised finish), supplied in 1m lengths where the supplier states a length. This page lists 6 items: M12 to M36.

The supplier names these rods G8.8; in the Hobson chart the matching name is class 8.8.

Hobson lists class 8.8 as high tensile, and its class and grade chart pairs class 8.8 with imperial grade 5 (manufacturer-stated).

The pitch shown for each size is the coarse pitch given in the Hobson thread table (manufacturer-stated).

Some items are single lengths and some are packs; the table shows which.

For some items the supplier gives no description line, so only the size and the product name are published for them: length and pack quantity are not stated.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 6 sizes: M12 to M36
• Metric thread, fully threaded along its length
• Galvanised finish
• Supplied in 1m lengths
• Minimum tensile strength for each size from the Hobson guide, shown in the table (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; compare the pitch in the table with your nut. The length shown is the full length of the rod; it can be cut to suit. Strength figures are the minimum tensile strengths for the class or grade and size range in the Hobson guide, which is a head-marking table, so treat them as the class or grade minimum and not a test result for the rod (manufacturer-stated). For a different strength level see Hobson Allthread Rod, Class 4.6 UTS, Plain, M6 to M56, 1m.

Related products

Related rods: Hobson UNF Threaded Rod (Allthread), Grade 5, Plain, 3ft, 5/8", Hobson Hobrod Allthread, Class 10.9, Plain, M10 to M48, 1m and Hobson Hobrod Allthread, UNC, Grade 8, Plain, 3ft, 5/8" to 2".