Bremick UNC Allthread Rod, size 1/2

Bremick UNC allthread rod is fully threaded along its length (UNC thread, Grade 1, plain finish), supplied in 3ft (914mm) lengths. There are 3 items: 1/2" to 3/4", 3ft (914mm) long. Each item is a single length.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or hanger
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Matching an existing UNC thread where a replacement is needed
• Replacing a bolt where a length that is not standard is needed

Features

• 3 items: 1/2" to 3/4", 3ft (914mm) long
• UNC thread, with threads per inch shown in the table
• Grade 1, plain finish
• Full-length rod that can be cut to suit

Key specifications

Choosing the right option

Match the thread form and diameter of your nuts to the rod. The sizes are nominal diameters in inches; the table gives the threads per inch for each. The length shown is the full length of the rod; it can be cut to suit.

See also: UNC Grade 2 plain allthread rod, Grade 8.8 allthread rod, UNC hex nut, Grade 8.8.