Hobson ASMSPC0180914 3/16" UNC Allthread Rod, Grade 1, Black, 3ft

The Hobson UNC allthread rod is fully threaded along its length (UNC thread, black or plain finish), supplied in 3ft (914mm) lengths. This page lists 9 items: 3/16" to 1-1/2".

Grade 1 is not covered by the Hobson strength tables, so no strength figure is published for these items.

The Hobson acronym list defines UNC as Unified National Coarse Thread and TPI as threads per inch. The table gives the threads per inch from the Hobson thread table, for the sizes it lists (manufacturer-stated).

Each item is a single length.

The supplier lists the 3/16", 1/4" and 5/16" items with a black finish. The other sizes on this page are plain.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 9 sizes: 3/16" to 1-1/2"
• UNC thread, fully threaded along its length
• Black or plain finish
• Supplied in 3ft (914mm) lengths
• Grade 1 strength level

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. Sizes are nominal diameters in inches; compare the threads per inch in the table with your nut. The length shown is the full length of the rod; it can be cut to suit. For a different strength level see Hobson UNC Sampsonrod, Grade 5, Plain, 3ft, 1/4" to 1-1/2".

Related products

Related rods: Hobson Natural Nylon UNC Allthread Rod, 3ft, 1/4" to 1", Hobson UNF Threaded Rod (Allthread), Grade 1, Plain, 3ft, 1/4" and 1/2" and Hobson UNF Allthread Rod, Grade 1, Black, 3ft, 3/16" and 5/16".