Alpha PH2 torsion power bits, length (mm) 100

The Alpha MaxDrive PH2 torsion power bits absorb stress in the dual torsion zone, and the coating relieves pressure on the tip of the bit, giving greater durability and less breakage. They are suited to impact driving and also perform in standard use.

The three lengths come in different pack quantities: the 50mm bit is a pack of 10, and the 75mm and 100mm bits are packs of 5.

Where this product is used

• Driving Phillips PH2 screws with an impact driver
• Standard (non-impact) screwdriving with a drill driver
• Driving screws below the surface using the 75mm and 100mm lengths

Features

• Phillips PH2 point in 50mm, 75mm and 100mm lengths
• 7.2mm body diameter on all three codes
• Dual torsion zone absorbs stress away from the tip
• Specially formulated coating for greater durability and less breakage
• S2 raw material with full body hardness
• Magnetism helps the bit grip the screw and prevent cam-out

Key specifications

Choosing the right option

Choose the length for the reach you need: 50mm for normal access, 75mm or 100mm for fasteners below the surface. Note the pack quantity changes with the length (10 for 50mm, 5 for 75mm and 100mm). For a 150mm single bit see the MaxDrive PH2 x 150mm carded bit.

See also the: Alpha MaxDrive PH2 x 150mm Phillips Torsion Power Bit, Carded, Alpha MaxDrive PH2 x 30mm Phillips Torsion Insert Bit, Handi Pack of 10.