Alpha carded Phillips power bits, PH2 / 50

The Alpha carded Phillips power bits are 1/4" hex power bits in PH1 x 50mm and PH2 in 50mm, 75mm, 92mm, 100mm and 150mm, each a single bit on a hangable card.

The PH1 bit has a 4.5mm body diameter and the PH2 bits have a 6.0mm body diameter. These bits have a 1/4" hex quick change shank, optimum full body hardness for longer service life and less wear, a compression forged tip to reduce breakage and magnetism that helps the bit grip the screw. For packs of 10 see the Phillips power bits in the related products.

Where this product is used

• Driving Phillips screws with a drill or driver
• Replacing a single worn bit in the toolbox or van
• Reaching Phillips PH2 screws that sit below the surface with the 100mm and 150mm bits

Features

• Phillips points in PH1 and PH2
• 50mm to 150mm overall length
• 4.5mm body on PH1, 6.0mm body on PH2
• 1/4" hex quick change shank
• Compression forged tip to reduce breakage
• Single bit on a hangable card

Key specifications

Choosing the right option

Choose the point size (PH1 or PH2) and the length for the reach you need: 50mm for general use, 92mm to 150mm for recessed screws. For packs of 10 see the Alpha Phillips power bits and for a handi pack of 10 see the handi pack Phillips power bits.

See also the: Alpha Phillips Power Bits, PH0 to PH3, 50mm to 250mm, 1/4" Hex Shank, Pack of 10, Alpha Phillips Power Bits, Handi Pack of 10, PH1 to PH3, 50mm to 150mm, Alpha Phillips Insert Bits, Card of 2, PH1, PH2 and PH3 x 25mm.