Alpha phillips power bits, PH3 / 75

The Alpha Phillips power bits are 1/4" hex power bits in PH0 to PH3, 50mm to 250mm, supplied as a pack of 10. PH0 is rated at 75mm; PH1 at 50mm, 75mm, 92mm, 100mm and 150mm; PH2 at 50mm, 65mm, 75mm, 92mm, 100mm, 150mm, 200mm and 250mm; and PH3 at 50mm, 75mm, 100mm and 150mm. The PH0 and PH1 bits have a 4.5mm body diameter and the PH2 and PH3 bits have a 6.0mm body diameter.

These bits have a 1/4" hex quick change shank, optimum full body hardness for longer service life and less wear, a compression forged tip to reduce breakage and magnetism that helps the bit grip the screw and prevent cam-out. The PH2 x 200mm and PH2 x 250mm bits are sold as single bits rather than packs of 10.

Where this product is used

• Driving Phillips screws with a drill or driver
• Reaching Phillips screws set deep in the work with the 100mm to 250mm bits
• Fixing, fit-out and maintenance work with PH0 to PH3 Phillips screws

Features

• Phillips points in PH0, PH1, PH2 and PH3
• 50mm to 250mm overall length
• 4.5mm body on PH0 and PH1, 6.0mm body on PH2 and PH3
• 1/4" hex quick change shank
• Compression forged tip to reduce breakage
• Magnetism helps the bit grip the screw and prevent cam-out
• Packs of 10, except the 200mm and 250mm PH2 bits which are single

Key specifications

Choosing the right option

Choose the point size to match your screws (PH0 to PH3), then the length: 50mm to 75mm for general use, 92mm to 150mm for more reach and 200mm or 250mm for deeply recessed screws. For a handi pack of 10 see the handi pack Phillips power bits, for a single bit on a card see the carded Phillips power bits, and for a ribbed point see the Alpha Phillips ribbed bits.

See also the: Alpha Phillips Power Bits, Handi Pack of 10, PH1 to PH3, 50mm to 150mm, Alpha Phillips Power Bits, Carded, PH1 and PH2, 50mm to 150mm, Alpha Phillips Insert Bits, PH0 to PH4, 25mm to 38mm, 1/4" Hex Shank, Pack of 10.