Austsaw ABRX2102560 210mm x 60T RaiderX Aluminium Multi Material Blade

The Austsaw RaiderX Aluminium Multi Material Blade is a controlled triple chip circular saw blade for cutting aluminium, plastic, laminate, MDF, chipboard, plywood, softwood and composite decking (manufacturer-stated). This page lists five sizes from 210mm to 305mm: 210mm and 235mm for circular saws, and 216mm, 255mm and 305mm for mitre saws.

Austsaw describes a controlled triple chip tooth design that eliminates over feeding or grabbing, an anti-vibration slot that absorbs vibration, impact resistant brazing for tooth bonding and an anti-friction coating that increases blade life (manufacturer-stated). All sizes have a triple chip (TCG) tooth grind and a -5° hook angle (listed in the catalogue as Rake) and are listed for trim / finish work.

The maker notes that lubricant must be used when cutting aluminium, and lists Aly-Lube aluminium lubricant for the job (manufacturer-stated). Tooth count rises with diameter, from 60 teeth on the 210mm blade to 120 teeth on the 305mm blade, and the maximum speed falls from 6,000 RPM to 4,500 RPM, so check the blade against the maximum RPM of your saw.

Where this product is used

• Cutting aluminium (lubricant must be used)
• Cutting plastic and laminate
• Cutting MDF, chipboard and plywood
• Cutting softwood and composite decking

Features

• Controlled triple chip tooth design that eliminates over feeding or grabbing (manufacturer-stated)
• Anti-vibration slot absorbs vibration in all cutting applications (manufacturer-stated)
• Impact resistant brazing for tooth bonding (manufacturer-stated)
• Anti-friction coating increases blade life (manufacturer-stated)
• Triple chip (TCG) tooth grind with a -5° hook angle on all sizes (manufacturer-stated)
• Lubricant must be used when cutting aluminium (manufacturer-stated)

Common specifications

Key specifications

Figures are from the Austsaw catalogue Edition 21 and the Alpha Tools product feed (manufacturer-stated). Bush is shown where the catalogue lists one.

Selecting the right option

Choose the diameter and bore your saw takes: the 210mm and 235mm blades are listed for circular saws and the 216mm, 255mm and 305mm blades for mitre saws, and the bore column shows the bush the catalogue lists with each bore. Use lubricant when cutting aluminium (Aly-Lube aluminium lubricant). For the smaller 165mm and 185mm sizes see RaiderX Aluminium Multi Material Blade, 165mm and 185mm; for the Extreme triple chip aluminium range see Austsaw Aluminium Blade Triple Chip.

Related products

See also RaiderX Aluminium Multi Material Blade, 165mm and 185mm, Austsaw Aluminium Blade Triple Chip, Aly-Lube aluminium lubricant and Austsaw saw blade bushes.