AutoTech solvent-based epoxy floor coating kit, Carbon

AutoTech Epoxy Floor Coating is a solvent-based, two-part epoxy floor coating kit for interior bare concrete floors, in an 8L kit with a gloss finish. There are 3 colours: Carbon, Manhattan and Sterling Grey.

A single 8 litre kit covers a standard double garage of 36 to 40m² with one coat; weathered, rough or porous concrete may need a second coat. The kit contains Part A (base), Part B (activator), concrete etch, decorative flakes, a stirrer and an instruction sheet. It is for interior bare concrete floors only. It is not intended for use on sealed concrete, unsound previous coatings, tiles, wet areas, floors with a moisture problem, carports, driveways or pool decks. New concrete must cure for at least 4 weeks and all bare concrete must be etched.

Where this product is used

• Coating garage floors
• Coating workshop and rumpus room floors
• Coating small retail floors up to 40m²

Features

• 8L two-part kit, gloss finish
• Resists hot tyre pick-up
• Covers 36 to 40m² with one coat
• Kit includes etch, decorative flakes and stirrer
• Interior bare concrete floors only

Key specifications

Choosing the right option

Choose the colour: Carbon, Manhattan or Sterling Grey; colours shown are indicative only. Each kit is a single use for 36 to 40m², so do not split a kit; for larger areas buy kits with the same batch number so the colour is uniform. Extra decorative flakes are sold separately.

See also: AutoTech Epoxy Decorative Flakes.