B-Safe Fall Arrest Harness with Integrated 2 m Web Lanyard BH01151, M (BH01151)

The B-Safe fall arrest harness with an integrated lanyard, code BH01151, is a full body harness with front and rear fall arrest attachment points and a 2 m energy absorbing webbing lanyard fitted to the rear D ring (manufacturer-stated). B-Safe's catalogue lists BH01151 in size M. Beaver's data sheet describes a 2 m energy absorbing webbing lanyard fitted to the rear D ring, with a double action snap hook that has an anti roll out device (manufacturer-stated). Beaver does not state the lanyard's rated capacity or arrest distance, so ask AIMS for the lanyard test certificate.

B-Safe's data sheet lists fall arrest (the integrated lanyard on the rear D ring, an inertia reel on the rear D ring or front loops, or a separate lanyard on the front loops), restraint, and recovery and rescue. B-Safe's catalogue says its harness range provides 140 kg capacity when used with B-Safe shock absorbing lanyards or inertia reels, and that every harness is individually proof loaded to 7.5 kN (750 kg) before final inspection (manufacturer-stated). B-Safe's data sheet states the harness is AS/NZS 1891.1:2007 certified, and B-Safe's catalogue says its harnesses are made to meet AS/NZS 1891.1 and should be used, cared for and maintained to AS/NZS 1891.4 (manufacturer-stated). Ask AIMS for the certificate that applies to the harness supplied.

B-Safe's technical guide says to inspect fall protection equipment before each use, to check the date of manufacture and the remove from service date on the label, and to take any equipment that has been used to arrest a fall out of use and return it to the supplier for inspection and certification, or destroy it (manufacturer-stated).

Fall protection equipment must be selected, installed, used, inspected and maintained by trained people in line with the manufacturer's instructions and the relevant Australian Standards. Ask AIMS for the instructions and test certificates before you order, and never use it for any purpose other than the one it was made for.

Where this product is used

• Fall arrest using the integrated lanyard on the rear D ring, an inertia reel on the rear D ring or front loops, or a separate lanyard on the front loops (manufacturer-stated)
• Restraint, using an energy absorbing lanyard on the rear D ring or front loops (manufacturer-stated)
• Recovery and rescue using both front loops connected together (manufacturer-stated)

Features

• Integrated 2 m energy absorbing webbing lanyard on the rear D ring (manufacturer-stated)
• Double action snap hook with an anti roll out device (manufacturer-stated)
• Front and rear fall arrest attachment points (manufacturer-stated)
• Weight 1.9 kg (manufacturer-stated)
• Fully adjustable leg, shoulder and chest straps (manufacturer-stated)
• Sub pelvic strap so the harness does not peel off in a backwards, crouched fall position (manufacturer-stated)
• Breathable rear mesh panel to help the harness hold its shape when donning (manufacturer-stated)
• All metal components batch numbered for traceability, and 100% visually inspected and proof loaded (manufacturer-stated)

Key specifications

Selecting the right option

B-Safe's sizing guide gives waist measurements of 660 to 900 mm for small, 750 to 1050 mm for medium and 750 to 1150 mm for large and extra large, and says the guide does not replace confirming a suitable fit before you buy (manufacturer-stated). This listing is size M. Fit the harness using the instructions on its label before each use. Check the lanyard and snap hook before each use as well.

Related products

Other B-Safe harnesses and fall protection: the harness with waist belt and side D rings, the harness with integrated lanyard, the 2 m shock absorbing lanyard and the Arresto inertia reel. A harness is one part of a system, so check every item before you order.