Bahco BAH8069 110 mm 80 Series Central Nut Adjustable Wrench

The Bahco 80 series is a range of seven black phosphated central nut adjustable wrenches, from 110 mm (4 in) to 455 mm (18 in) long with jaw openings from 13 mm to 53 mm (manufacturer-stated). Bahco describes them as its traditional adjustable wrenches, with a slim line design and narrow, thin jaws.

Each wrench has parallel jaw faces for a safer grip, jaws angled at 15 degrees for access in confined spaces, and a moving jaw that does not fall out, even at maximum opening. A scale on the jaw is used to pre-set the opening and to measure nuts, bolt heads and metal thickness, and the coarse serration and generous knurl opening allow the jaw to be set with gloves on (manufacturer-stated). Bahco states that the wrenches are stronger than the demands set by ISO standards, whichever drive direction is used. The wrench lengths here are Bahco's, so they run slightly longer than the nominal 100 to 450 mm sizes used in some listings.

Where this product is used

• Tightening and loosening nuts and bolt heads from 13 mm up to 53 mm across (manufacturer-stated)
• General workshop, maintenance and site work where one tool must cover several sizes (manufacturer-stated)

Features

• Slim line design with narrow, thin jaws (manufacturer-stated)
• Parallel jaw faces for a safer grip (manufacturer-stated)
• Jaws angled at 15 degrees for access in confined spaces (manufacturer-stated)
• Moving jaw does not fall out, even at maximum opening (manufacturer-stated)
• Scale for pre-setting the opening and for measuring nuts, bolt heads and metal thickness (manufacturer-stated)
• Extra wide, rounded handle that spreads pressure evenly in the hand (manufacturer-stated)
• Extra coarse serration and a generous knurl opening for use with gloves (manufacturer-stated)

Common specifications

Key specifications

Length, jaw opening and weight are Bahco's catalogue figures (manufacturer-stated). The 8072 jaw opening follows the Bahco Catalogue 2026; the 2023 adjustables catalogue shows 30 mm.

Selecting the right option

Choose by the largest nut or bolt head you need to turn, then by how much leverage and reach you need: the jaw opening runs from 13 mm on the 110 mm wrench to 53 mm on the 455 mm wrench (manufacturer-stated). The longer wrenches give more leverage but are heavier, at 1,035 g for the 380 mm and 1,665 g for the 455 mm. For more rust protection see the Bahco 8074 C chrome adjustable wrench, 380 mm; for a wider opening on a short tool see the Bahco 9029 wide jaw adjustable wrench, 170 mm or Bahco 9031 wide jaw adjustable wrench, 218 mm; for pipes and rounded nuts see the Bahco ERGO 90 series reversible jaw adjustable wrenches.

Related products

Related Bahco adjustable wrenches: Bahco 8074 C chrome adjustable wrench, 380 mm, Bahco 9029 wide jaw adjustable wrench, 170 mm, Bahco 9031 wide jaw adjustable wrench, 218 mm, Bahco 9031-T wide thin jaw adjustable wrench, 218 mm and Bahco ERGO 90 series reversible jaw adjustable wrenches.