BECO 6200 High Temperature Deep Groove Ball Bearing Shielded 200°C

The BECO BHTS ZZ C4 200° is mechanically identical to the Viton-sealed BHTS 2RS C4 VT 200° — same stabilised AISI 52100 chrome steel, same C4 radial clearance, same 200°C grease — but it uses ZZ steel shields instead of seals.

That makes it a noticeably cheaper way to get to 200°C where the bearing is not fighting dust, splash or wash-down. It runs from -30°C to +200°C without re-greasing, and steel shields carry no rubber, so there is no seal compound to degrade over time.

Suited to clean, dry heat. Where dust, splash or wash-down is part of the job, the Viton-sealed BHTS 2RS C4 VT 200° is the better choice.

At a glance

• Clean, dry heat — the lower-cost route to 200°C where the bearing is not fighting dust or wash-down
• Nothing to degrade — steel shields carry no rubber, so there is no seal compound to break down
• Room to expand — C4 clearance allows for shaft and housing expansion at temperature

Full specifications, applications and features are in the tabs below.