Bondhus 1/8" Ball End L-Wrench, ProGuard

The Bondhus ball end L-wrench is an imperial hex key with a rounded ball end that goes into the screw at a 25° angle. That angle lets you turn the screw without lining the key up straight on, which funnels the tool in faster and works in hard-to-reach places. It comes in these sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 3/16", 7/32" and 5/16".

Bondhus makes it from Protanium High Torque Steel in the U.S.A. with a ProGuard finish for corrosion protection. The tips are chamfered for faster insertion and full engagement in the screw head. An L-wrench is a hex key bent into an L, with a long arm and a short arm. Here the long arm is 76mm to 152mm and the short arm 14mm to 32mm, depending on size. If you want the screw held on the tool, look at the Bondhus ProHold ball end L-wrench.

Where this product is used

• Turning hex socket screws at an angle, with a 25° ball end
• Reaching screws in hard-to-reach places

Features

• Ball end inserts into the screw at a 25° angle
• The ball end funnels the tool quickly into the screw
• The 25° angle allows natural hand and wrist movement
• Chamfered tips for faster insertion and full engagement in the screw head
• Long arm of 76mm to 152mm (3.0" to 6.0"), depending on size
• Short arm of 14mm to 32mm (0.56" to 1.25"), depending on size
• ProGuard finish gives corrosion protection
• Made in the U.S.A. from Protanium High Torque Steel

Key specifications

Supplied with

• Sold by size (not a set)

Choosing the right option