Bossweld binzel 501 Style Swan Neck

Bossweld Binzel 501 Style Swan Neck, Water-Cooled fits Binzel 501 style water-cooled MIG torches. It is the replacement swan neck for the water-cooled 501 style torch.

The swan neck is the curved tube that connects the torch handle to the front-end parts, and it carries the welding current, shielding gas and wire to the contact tip. It takes heat and spatter at the front of the torch, so it is a wear part, and it is the first thing to check if the torch has been dropped or the front end will not seat properly.

Where this product is used

• Replacing a bent, cracked or worn swan neck
• Refurbishing a torch after heavy use
• Keeping a spare neck on hand for production welding

Features

• Binzel 501 style water-cooled MIG torches
• Cooling: Water-cooled torch
• Torch fit: Binzel 501 style water-cooled MIG torches
• Part number: 92.06.501.1

Key specifications

Choosing the right option

Match the swan neck to your torch style and, where there is a choice, to the bend angle: a 45 degree bend and a 60 degree bend change the angle at which the nozzle approaches the joint. Fit the front-end consumables made for the same torch style, because swan necks and consumables from different styles do not interchange.

Matching parts for the same torch style: Bossweld Binzel 501 Style Contact Tips 10mm Body (Pack of 10), Bossweld Binzel 501 Style Adjustable Conical Nozzle 16mm (Pack of 2), Bossweld Binzel 501 Style Gas Diffuser, White (Pack of 2), Bossweld Binzel 501 Style Tip Holder M8 Short 28mm (Pack of 2).