Bossweld 26 Series TIG Torch, Flex Head with Valve, Dinse 50, 4 m

The Bossweld 26 Series TIG Torch, Flex Head with Valve, Dinse 50, 4 m is a complete 26 series air-cooled TIG torch with a 4 m cable. The 26 series is an air-cooled torch for medium duty welding, with higher amperage capability than the 9 and 17 series, and it takes standard 26 series consumables.

The flex head has a bendable neck, so you can set the head angle to reach tight joints. The gas valve on the torch lets you adjust the shielding gas flow at the torch. The Dinse connection comes in Dinse 50; match it to the socket on your machine. It does not include a plug, and is normally used with machines that do not need one.

Where this product is used

• TIG welding in tight joints where a flex head helps access
• Replacing a worn or damaged complete torch
• Setting up a new machine with a matching torch

Features

• 26 series air-cooled TIG torch
• Flex Head with Valve
• Dinse 50
• Cable length: 4 m

Key specifications

Choosing the right option

Choose the torch series to match the consumables you stock and the current you weld at, then pick the head (rigid, flex or valve), the control (switch or current control), the connection to suit your machine, and the cable length. Check the plug or Dinse size against your machine socket before ordering.

Matching parts for the same torch series: Bossweld TIG Torch Head WP9, WP18, WP20 and WP26, Bossweld Collet 1.6mm, 17/18/26 Series (Pack of 5), Bossweld Alumina Cup Size 5, 8.0mm, 17/18/26 Series (Pack of 2), Bossweld Long Back Cap, 17/18/26 Series (Pack of 2).